Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Thinking of trying Earlex 5500 and GF waterbornes

Featured Replies

I am a long time Waterlox user and absolutely love the product. It is easy to use and looks great. The only downside is the slow dry and cure times which can sometimes put off odors for weeks. It seems waterbornes are gaining more momentum lately and General Finishes and the Earlex 5500 are popular for hobbiests. I think if I'm going to dive into waterbornes that spraying makes the most sense. I do have some questions:

1. Can you spray inside a garage? If so do you just cover all your machinery?

2. What air temps do waterbornes need sprayed at?

3. My favorite mission finish is water-based dye, dewaxed shellac, oil-based stain as glaze, and Waterlox topcoats. Can the same schedule be used replaxing the Waterlox with waterborne after allowing the stain to fully dry?

4. What is the difference between General Finishes High Performance Poly and Endurovar Poly Varnish and any preference to one over the other? Also, would a 1.5mm tip work for both?

Might have a kitchen sideboard project coming up and a no odor finish would be ideal when delivering it.

1. Can you spray inside a garage? If so do you just cover all your machinery?

Yes, most of my tools are mobile so I move them out of the way. Don't really have much overspray with an HVLP system. This is one of the great things about an HVLP.

2. What air temps do waterbornes need sprayed at?

General Finishes likes to be sprayed at 70° and 70% humidity.

3. My favorite mission finish is water-based dye, dewaxed shellac, oil-based stain as glaze, and Waterlox topcoats. Can the same schedule be used replaxing the Waterlox with waterborne after allowing the stain to fully dry?

Yes you can still use your same schedule. Just make sure you let the oil-based stain dry completely.

4. What is the difference between General Finishes High Performance Poly and Endurovar Poly Varnish and any preference to one over the other? Also, would a 1.5mm tip work for both?

Yes 1.5 is find for both finishes.

GF Enduro Var will amber the wood much like oil will. It is also cross-linking which makes for a harder and more durable finish. Dries in 2-4hrs. I have sprayed coats with in an hour with a well heated shop.

GF High Performance goes on clean and is not cross-linking. It goes on clear and can be tinted to tone projects. Dries in 1-2 hrs. I spray coats every 30-45 minutes.

Might have a kitchen sideboard project coming up and a no odor finish would be ideal when delivering it.

I use both finishes. I use HP on kitchens and use on Enduro on stairs, Tables, ect.

One additional concern, perhaps especially relevant to spraying in a garage: make sure your environment has as little dust as possible. The HVLP will gradually cause any dust in the room to become airborne, which will then settle onto your projects. My early forays with spraying were in a garage, and as the day went on, the amount of dust kicked up continued to increase. Now, I try to spray outside (which works for ~8 months/year), usually using shellac + GF HP with an earlex unit. When I cannot spray outside, I often make a temporary (very simple) spray booth (thin poly sheets stapled to the ceiling, creating a ~4-sided tent).

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.