Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Need advice on blotching maple...

Featured Replies

I attempted to follow the process laid out in episode 73 (Coloring Blotchy Woods).  Most of the pieces came out decent, but two of the boards on one door look awful.  I am using minwax oil stain (I know I should be using gel stain, but the wife insisted on this from the test pieces).  I tried applying a varathane gel stain on top of the oil stain, but that didn't seem to help (just on the blotchy door seen below).  The other door and large board only have a 1 pound cut of shellac and 1 coat of stain.  Any advice would be appreciated.  Thanks! 

 

John

 

 

 

half_pic1.jpg

 

 

half_pic2.jpg

 

 

half_pic3.jpg

 

 

I am very new but maybe you could use the 1# cut shellac over the blotchy stained wood and more stain or try to remove the stain on that piece, clean it up , seal and restain. 2nd option should work ,not sure about sealing over th stain, I am experimenting with that scenario now

I can't peak of plaining it, I had a piece of maple blotching badly at the 1# cut of sealcoat worked very well, the down side is less stain is absorbed all the way around so the finish is lighter. MArc has a video on it , #73. Well mine went well on the test piece, not so well on the actual project, debating my options...

  • 2 weeks later...

When I have blotchy wood. I'll seal the wood before a stain or condition it with varsol or shellac. But if I don't I'll just harmonize the color by applying the neutral base wiping stain to the ‘darker’ spots to even out the color or use a toner with a spray gun. 

  • 3 weeks later...
  • Author

I ended up sanding it off and redoing it.  I applied a #1 cut of shellac again, which made me realize the first application of shellac was too light.  Now with a better base of shellac, it looks acceptable.  Although, I will refuse to use regular stain on maple again.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.