RJsumthn Posted March 4, 2013 Report Posted March 4, 2013 I bought a Stanley Bailey No. 5 Jack Plane a couple days ago at an antique mall for under $20. It had seen better days but it looked very solid with no visible defects. Since I already have a Jack Plane, I decided that I would make this more of a Scrub plane. Today I started to clean it up. I took it apart and ran a wire brush over everything. I sanded the knob and handle and applied the first coat of BLO. Then I started to lap the sole of the plane. The plane had drops on paint on it that I was trying to get off. Since I knew I was going to use it as a scrub plane, I didn't need to get it dead flat but just remove the rust and paint drops. I had lapped the sole with the first grit and was about to move to the next grit. Then I decide I wanted to clean up the sides a little bit. So I turned the plane on it side and made a few strokes with it. I turned it over and saw this. It is engraved with "United States Property T-135-E" I thought this was so cool. Just imagining what the government could have use this plane for. Who knows, it could have been used to renovate the White House for all I know. Do you guys have any experience with uncovering something from the tools past? Quote
ChrisG Posted March 4, 2013 Report Posted March 4, 2013 Don't know who specifically was using them but Miller Falls had a contract with the US goveranment and made so many that they actually added the letter "G" to the model numbers of those that were sold to the government. Its not ucommon to find MF planes with this G in model numbers. Can read a bit about it here.http://oldtoolheaven.com/bench/benchtable.htm Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.