Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

question reguarding table saw fence diy upgrade

Featured Replies

was curious if someone could tell me what that white synthetic looking material is i see on the sides of peoples table saw fences?  it looks like synthetic cutting board material to me but i wasnt sure it seemed thicker in the few glimpses i can catch in videos.  i know its used sorta as a sacrificial barriar between the fence and the blade and i want to do something similiar but i cant seem to find out what the stuffs called or where to source it from?  any help is much appreciated.  sorry if its been asked before i didnt do a search since i wasnt sure what it was even called to search about.  if my descriptions not vivid enough i can post a picture.  thanks in advance.

 

 

 

Nyles

 

 

  • Author

thanks guys thats exactly what i was looking for  its a little more expensive then i was hoping but thats the stuff.  thanks again.

 

 

 

 

Nyles

  • Author

thanks knotscott, i was going to use some MDF originally but was always impressed with how much more professional the other stuff looked.  i pry will go ahead and use some MDF for now if nothing else it will give me an idea of exactly how ill need to cut and mount the more expensive stuff when i get it.   thanks again everyone for the quick replies.

 

 

Nyles

I have plastic facings on my fences, but install MDF faces when I'll cut into it.   Something like this makes the MDF face easy to install and remove:

http://www.rockler.com/product.cfm?page=17821

 

If you're ripping against it, you can wax the MDF.

 

I don't care how professional it looks... :D

  • Author

CessnaPilotBarry,  just out of curiosity do you add the MDF to protect the plastic?  I am not sure why you would do both? or am i possibly missing something?  my thoughts on this for myself were to basically put pieces on both sides of my fence using T bolts (my fence has t-bolt slots on the side of it)  and countersunk screws attatching to the T bolts so that way i wouldnt need to screw or drill anything into the fence its self?  i want to do both sides so one side can have a semi flush groove cut for my router table thats built into my table saw extension and the otherside as a sacrificial fence for cutting close to the fence on the table saw side?  my hopes were to be able to use the table saw fence for both set ups.  I also figured that since id pry have left over material i could make more then once 'fence guard' using one for my dado blade and another for say my normal blade?  if im missing somethning or someone has a better suggestion speak up id rather know now then after i purchase and start cutting to size ;-) 

 

 

 

Nyles

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.