Cass Kucsera Posted March 24, 2013 Report Posted March 24, 2013 Hi everyone i have a few questions about Old unisaws every where you read about old saws people say that they are not as safe as new saws,Not enough HP,ect.. I am redoing a 1950's unisaw.thats been repainted all bearings,belts and bushings I have installed 2 safty stops , it has 1.5 HP 3 phase w/VFD and brake,sliding table,52" unifence,biesemeyer and micro-jig splitters,shop fox hd 1300 lb mobilebase so what else is needed to make it as safe or as good as new saws Quote
TRBaker Posted March 24, 2013 Report Posted March 24, 2013 Hey Cass. Welcome to the forum. I don't know of anything else you could do to make it safer. The horse-power is not a safety issue as long as you don't push it beyond it's capabilities. Of course, that's true of any horse power. Quote
Cass Kucsera Posted March 24, 2013 Author Report Posted March 24, 2013 The hp on old 1.5 hp motor is equal to modern 3hp. My motor is 1.5 hp@1740 rpm Quote
wdwerker Posted March 24, 2013 Report Posted March 24, 2013 I have 2 old UniSaws. Best safety equipment is your brain. Work safe, use push sticks, use guards when possible. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.