Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

painted kitchen table...

Featured Replies

Hi...I have a painted high-top kitchen table.  It was custom made, and I had the guy paint it black.  I was told the finish was impervious to almost anything.

 

I've noticed that there are now a couple of places on the top that seem like the finish is worn off.......I suspect my (retired) husband used a Magic Eraser, or sponge with a scratchy side to clean up something.Of course, he denies this.  :D

 

There is nothing wrong with the paint itself.  I'm reluctant to sand the top and repaint/refinish, because I'd like not to disturb the paint, but rather just apply the correct finish.

 

Is there something I could use to just remove the finish (I presume I have to do this prior to re-finishing)?  And, what would be a durable finish? The finish on the table now is not glossy, which I like ... and you can see the wood grain through the paint, too, which is nice

 

One thing I should mention:  shortly after getting the table, I'd set a glass down ... it was either 'sweating' or was wet on the bottom.  When I picked up the glass later, I saw a white 'circle' on the top.  In a fairly short time, that circle disappeared!  So something tells me that moisture was getting through the 'impervious' finish, but dried in time. Have noticed that many times since...it always disappeared.

 

Anyway.....I'd appreciate any advice or instruction.  Thanks much.

 

First place I would check is the guy who built it. He might spray a coat or 2 of the same finish over it for a fair price. Or he could tell you what is or isn't compatible.

One way I acheive a black finish with the grain still showing is to dye the wood and then use a clear satin finish. Or a couple of thin coats of black lacquer and a clear satin finish.

If the damage is only in one area I would first bring the rest of the top to the same condition, or strip it and start over. If the top can be removed you wouldn't have to re-do the whole table.

Finishing is tricky some finishes do not play well with others. I use water based finishes but lots of shops use solvent based lacquer .

  • Author

I wish I could ask the guy that made it....I bought it from a local small business and they're no longer there.  All I know is "Dave, the Amish guy" built the table.  LOL.

 

I love that look of being able to see the grain of the wood through the paint color.  But I'm afraid I will have to do re-do the top (which is removable)......when I just wanted to put a fresh finish on top.  Like you say, though, some finishes don't play nice with others.  

 

Do you think that if I gave it a  light sanding that would remove the finish without removing the stain or paint?

 

Thanks.......

  • Author

This isn't a great pic...I can take more if needed.  Hopefully you can see the 'worn' finish.  If you look to the upper right, you'll see the part that isn't worn. Let me know if I should take another pic......thanks!  

post-13764-0-14565400-1364502869_thumb.p

Put some lacquer thinner on a rag just a little and see if it softens the finish or destroys it. If it just softens it and it sets right back up its lacquer. If it bubbles or cracks it probably not. 

Based on the picture, your surface looks like it's ready for a do-over. If this were me I would strip the finish and start over. I'm leaning towards, you may have a pigmented topcoat sprayed directly on the wood. Appears the color was removed from the scratched portion, which is a good indicator of a pigmented topcoat. It's hard to see in the picture...is the color gone in the scratched area?

 

-Ace-

  • 4 months later...

Sounds like a waterbased poly finish.  I heard it will do that with water but I haven't seen it even though I top coat all of my painted and oil based stained projects with it.  You can always test the theory without ruining your finish by getting a piece of scrap wood painted black and top coating it yourself with some.  

 

If it is poly as I think, I would lightly sand the finish with 320 and re-coat it.  :)

Hey Marges. Welcome to the forum. Before you sand it all off, try hitting the damaged area with a spray can of clear satin lacquer. The worst that can happen is that it doesn't work. Lacquer is very forgiving when it comes to spot repairs. If it is just a lacquer finish, and that is all that is damaged, it may just solve all your problems.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.