Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Oak and walnut pub chair

Featured Replies

My wife has been asking for some bar stools for a while now. I saw some pub chairs in the November issue of Wood magazine (Issue 215 Nov, 2012) that I liked, but I wanted a different look. I decided to laminate a 1/4" piece of walnut between two pieces of 5/8" thick quarter-sawn white oak for my 6/4 material. Both woods are fairly stable and the chairs will be in a conditioned house, so I don't think there will be any movement. The curve of the seat did not turn out the way I had planned, but I actually like what I wound up with. I was cutting the curve with a 1/4" bandsaw blade and it kept bellying out which lead me to buy an angle grinder and some aggresive sanding tools to fix the mess. When the 1/4" blade broke I fell back to my 3/4" blade. It worked surprisingly well on the remaining curves. I guess I will be using that on the next two chiars... I have 3 coats of tung oil applied so far, and plan 3 more.

I posted the entire build on my blog if anyone is interested: http://lwroten.wordpress.com/tag/pub-chairs/

 

I would welcome suggestions on improving the process. It took about 10 days to build one and I have two more to go.

post-7530-0-36201800-1366721944_thumb.jp

post-7530-0-81364800-1366721952_thumb.jp

post-7530-0-60076900-1366721958_thumb.jp

post-7530-0-39139300-1366721964_thumb.jp

  • Author

Thanks, I thought of flipping the oak/walnut order on the seat, back, and front stretchers, but this matches my hickory kitchen cabinets better.
 

i like your chair. not my cup of tea the uneven stripe up the middle. think if should be clean edge

 

I agree with that.  And is it just the pic, or are those raised ridges on the seat?  Kinda seems like that'd be a little uncomfy on the tush.

 

But I dig the design, love the joinery, and the way you used the contrasting woods looks great to me.  Aside from the issues on the seat, it's a pretty sweet stool!

  • Author

It is an illusion, the seat is completely smooth. The lines will be more even on the next two (hopefully). This was my prototype, so I learned a few things. The seat is constructed by cutting the scoop on a bandsaw out of (4) 5" wide pieces. The 4 pieces are joined, then sanded. the problem I had was the pieces shifted maybe 1/32 up or down. Normally this wouldn't be noticed, but with the laminations, it is obivious, as you see. The problem would normally be solved by clamping with cauls across the seat to hold everything at the same level, but with the seat dished and the bandsaw cuts imperfect, this was difficult. I intend to make the seat pieces longer on the next two so that there are flat areas on either side of the scoop for the cauls to be placed. I attached another picture that shows the seat closer. It is smooth, but if you look close you can see where one of the joints are raised slightly. It doesn't take much to mess up the line and my joinery is nowhere near perfect...

 

post-7530-0-93918200-1366817805_thumb.jp

How about some dowels, biscuits or Dominoes to help with alignment?

  • Author

I have never had luck with my biscuit jointer. (buying the cheapest one available was probably not the best course) It always seemed to make my joints worse... The dowels are a good idea, I may give them a try. The domino is, of course, out of my price range. I am slowly upgrading my tools to a more professional level, but justifying expenses without profit is hard to do...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.