Recommended Posts

Posted

Greetings,

 

I am a novice wood worker looking to pick up the DeWalt DW618PK. I saw a great YouTube review with Matt Vanderlist, of Matt's Basement Workshop and he had great things to say. Other reviews have been promising as well. Anyone have any experience with this router? Thanks.

 

-Fritz

 

Posted

I'm not familiar with the router myself but I did find a couple of reviews about it here: http://woodworking.about.com/od/recommendations/gr/DeWaltDW618PK.htm

Both reviews were in 2010 and 2011 so De Walt may have fixed the problems now.

 

And there are some bad reviews on Amazon about it too http://www.amazon.com/DEWALT-DW618PK-12-AMP-Fixed-Base-Variable-Speed/product-reviews/B00006JKXE/ref=cm_cr_dp_qt_hist_one?ie=UTF8&filterBy=addOneStar&showViewpoints=0

 

There are a lot more good ones too on Amazon so I guess the reviewers giving the bad scores were unlucky.

Posted

I have that router kit - have had it for years, and although I would not characterize my use of it as "heavy" I have used it quite a bit.

 

I find the balance good, the soft start is very nice, and I have not had a problem at all with the collets loosening or getting stuck.  The spindle lock is not great, but is usable once you get used to it.  It is very easy and quick to remove the motor and change bases.  I most often use the motor in my router table (with a Woodpecker router lift), and I've found the power to be good.  I've not done any raised panels with it, but for me the power was more than sufficient.  The removable cord is nice.  I strongly recommend getting the edge guide - it's a nice accessory.

 

I encourage you to read some of those reviews and make your own judgement on them.   The first review above dings it for the manual (most manuals stink), which IMO reflects more on the company and not the router.  The  other issue mentioned with the plunge lever I have not seen, but I have only used my plunge base a few times.  I do think the dust collection port on the plunge base is good.  Amazon reviews are also hit or miss, and most of them I disregard (especially the ones that mention any singular other brand by name - I find those to be suspicious).  Some of the earlier reviews seem to indicate a problem with the electronics, but I didn't see any recent comments on this and I know I have not had a problem.

  • Like 1
Posted

Something for Fritz to think about and a Question for John.

 

John, did you have to do any modification to the router table / router plate for the Dewalt to fit?

Do you find add-on accessories work with the Dewalt (most/most common are made for Porter-Cable) like 

guide bushings, Guide Bushing base, Inlay Bushing and bit, Etc. ?

 

I ask because i have a Rockler Router Table and the A plate, Got a Craftsman Pro Router kit for a gift (was planing on Porter-Cable 893pk, but when the new girlfriend buys Me the wrong one, I say Ok), had to drill 1 hole for the above table adjustment hole.

Posted

I did no modifications - I did have to get the correct mounting blocks for the Woodpecker lift, but it all worked as advertised.  I have a set of bushings for them but I honestly do not recall where I got them.

Posted

I have had this kit for about 7 years. When I first opened it, the plunge base was busted. This really sucked, but it was exchanged no problem.

Since then, it has been a great kit. I really like the d handle base, and have used it on everything from deck building to furniture making.

I found ther 2 hp motor under powered for the router table, so I bought a 3 HP unit for my table needs. Since then, the dewalt has been my "non table" go to router.

The cord is great, as it can be removed or replaced if needed. I also like all the great accessories included. The dust collection on the plunge base, as well as the edge guide, are excellent.

Overall, def worth the money.

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 35 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined