Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Worked great on oak, not so good on Pine. Help to a noob?

Featured Replies

  • Author

Here's an idea.. .I'll toss the old stuff, clean out the can, and use it for mixing the new stuff with the Mineral Spirits....

Your not going to make the pine look like oak not even close. Take the pine and go back to home depot and do Barry suggested.  

Before you jump on the Minwax haters bandwagon, realize the only thing wrong with minwax is their advertising of how simple the products are to use. Poly shades is just a shaded poly finish and if applied properly works very well. You mention sanding to 220 but no mention of sealer. First 220 is to fine especially for pine 150/180 is where you want to stop for stain but your not staining with poly shades. A shaded finish wether its minwax polyshades or a custom blend from sherwin williams which happens to be the same company need to be properly sealed before you start the shading process. With pine you would need to apply something like minwax sanding sealer then test for streaks. Keep adding sanding sealer until the streaking is gone. You may find that just one coat of sealer is needed for oak but 3 or 4 coats for pine. 

If you want to stick with the pine you can make it more of a solid finish hiding the fact that it is pine... well somewhat any ways. You can use a similar colored stain of pretty much any flavor just to darken up over a coat of sanding sealer. Reseal over the stain and follow up with the poly shades to build the final color. Your not going to get spray finished results but you will get better than a gel stain.

 

how do you know sherwin williams is minwax

  • Author

Since the orignal piece of pine is trash, I bought a new can of the polyshades and tried on the cleanup surface sanded to 120.  It went on MUCH better.  I experimented with foam brushes (I'm going to attract some haters with that) and regular brushes.

 

Foam brushes load up quickly for larger pieces and I had to switch out the brush frequently.  The regular brush worked well.  It looks good enough after 2 coats that had I used fresh stain AND  only sanded to 120 for pine, I'd be happy with the results.  I'm not aiming for professional quality, just something that's going to look halfway decent on a hardwood floor that I haven't put in yet.

 

Next I'm going to buy the piece of oak and prep the bottom.  Sand it to 220 like the other pieces and test several methods.  120, 220, and thin the stain as well.  5/1 per another post.  We'll see what happens.

 

Um.... What does Snarky mean?  LOL

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.