calblacksmith Posted June 21, 2013 Report Posted June 21, 2013 As we all know, Sears does not make what they sell. This planer came from the '50s I think, it used to belong to my uncle and I got it when he died many years ago. I never was interested in woodworking until recently so this old guy needs some serious cleaning but I think it will be worth it. It weighs some place in the ball park of 150#+ and is made from cast iron. There are two rollers on the moving table and the blade assembly is held by 4 posts. It is wired for 220. I put some oil and grease in the proper places then plugged in and hit the on button. It came to life and seemed eager to go to work. I ran an oak scrap through it about 10" wide and 18 or so long. Some chips flew and the board came out the other side thinner but the blades need some serious resurfacing. There is about 4" of snipe on either side of the board but I am sure that can be reduced if all the proper adjustments are made. If I can find out who made this old guy, I can then have a shot at getting some instructions on how to adjust everything. I have a local shop for the blade grinding and he has done a great job so far with circ blades, I don't see why he would not do well here too. There are 3 blades on the cutter head and it is about 4 to 4 1/2 inches in dia. The feed seems to work well and other than a lot of dirt and some rust and adjustments, there is no reason it should not go back to work for me. I would put the build quality in semi commercial by todays standards but when it was made, it was "normal" craftsman quality. It goes to show how far Craftsman has fallen. All info will help! Quote
calblacksmith Posted June 21, 2013 Author Report Posted June 21, 2013 The data tag. Sorry for the multiple posts, I am using a desk top computer connected to the internet over a wifi to my cell phone, lots of issues with speed in uploading pictures. Quote
calblacksmith Posted June 21, 2013 Author Report Posted June 21, 2013 Now that I have posted here, I did some looking with my work computer and it turns out to be a Parks Heavy Duty 12" X 4" Planer. They were manufactured from as early as 1936 and sold by Sears as late as 1959. Mine is a model 97, which has the belt guard and the fabed steel frame.. The shipping weight is 290 pounds from a Sears print add. The add also has the price as $179.50, by the shape of the gear housing cover, the add is showing a machine pre mid 1950's. That was quite a lot of money back then! A link to Vintage Machinery web page for this unit is http://wiki.vintagemachinery.org/Parks%20Heavy%20Duty%2012%E2%80%9D%20x%204%E2%80%9D%20Planer.ashx I'm still looking for a manual, I found one on Ebay but am still looking to find a "free" one LOL! Quote
calblacksmith Posted June 21, 2013 Author Report Posted June 21, 2013 Thank you Particle Board, you answered in a very quick time frame, I had not refereshed my screen or I would have been saved a lot of link following! Quote
wdwerker Posted June 22, 2013 Report Posted June 22, 2013 I took one look and thought "Parks" then I read the rest of the thread . And then it hit me how far Sears has fallen. Sad really. Good luck finding parts and info. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.