dwacker Posted July 17, 2013 Report Posted July 17, 2013 Anyone have the Wixey table saw DRO. MY pm has a good pointer but my eyes are not able to line up the two lines and the point on the tape anymore. Ive gone to doing the one eye closed thing. Is the Wixey a good option? Do they work well? Any problems that you are aware of? Thank you Quote
calblacksmith Posted July 17, 2013 Report Posted July 17, 2013 One eye closed, Yep, I am there. That is a great price for a 60 inch DRO. Even if it is not super accurate, and is within a few thou it should be good enough. The reviews at the Rockler website has 8 folks in love with it, all 5 star reviews. I am sure you know about it but the link is, http://www.rockler.com/product.cfm?page=22412&Max=999 Thanks for bringing it up, it looks like the next must have for my PM after the guard and splitter get to me and are mounted. Quote
CessnaPilotBarry Posted July 17, 2013 Report Posted July 17, 2013 My eyes are fine, tested twice a year, and I do the one eye sight... Quote
TRBaker Posted July 18, 2013 Report Posted July 18, 2013 Between my old back and my old eyes, woodworking is becoming more and more of a challenge. All indications are, it's not going to get any better. Quote
Boatworks Today Posted July 18, 2013 Report Posted July 18, 2013 Haven't used that Wixey product but do have a couple of their other things (angle meter, caliper). Very accurate and good service if there is a problem. My first angle meter was faulty out of the package. Called and actually spoke with the owner / designer and a new unit was in the mail that day. Very happy with things so far and would expect that the same accuracy would hold true for all their products.. Quote
dwacker Posted July 18, 2013 Author Report Posted July 18, 2013 Thanks folks. I think Ill go ahead and get one ordered. Quote
calblacksmith Posted July 22, 2013 Report Posted July 22, 2013 This thread got me thinking and when I was in Rockler on Friday, I bought the DRO. It installed easily and it is fairly accurate. I did a thread with pics in the review board. I think you will like it! Quote
Mike M Posted July 22, 2013 Report Posted July 22, 2013 I installed the Wixey on my PM2000 about 2 years ago. As I recall I made a couple of modifications to the install instructions. 1. I didn't like the way the supplied clips left the track hanging from the fence rail so I ended up drilling 2 holes in each piece of the extrusion and bolting the track directly to the fence rail. I had to use 1/4" spacers to provide clearance for the slider as well as to give sawdust an escape route. 2. I still have a problem with the crank handle for the blade height interfering with the rail when the blade is tilted. I either have to set the depth before tilting the blade or remove the crank handle if I want to adjust the height after the blade is tilted. This isn't a big issue since I do most of my cutting with the blade at 90 degrees. 3. It worked out that the magnet in the slider hit the casting on the fence so I didn't need the extra striker plate. Once I had it installed, it has been working perfectly. It seems to hold it's '0' from day to day and the batteries last about 6 months. I bought a bunch of batteries on EBay for about a quarter apiece so I don't worry about battery life. I would also recommend the wixey angle box. I use it to set the blade tilt as well as many other tasks around the shop. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.