Retired Mark Posted August 8, 2013 Report Posted August 8, 2013 I am making some louvers with basswood for some shutters. I have cut the basswood to 7/16" thickness and either 25" or 12 1/2" lengths. Final lengths will be 12 5/16"; final thickness will be 3/8". I have a plantation shutter louver router bit from Rockler to shape the louvers. My question has to do with router speed with this soft wood. Do I speed up the router to get the best results or do I slow it down? Quote
dwacker Posted August 8, 2013 Report Posted August 8, 2013 Fast with slower feed rate. if your getting tear out reduce the depth and climb in multiple passes. 1 Quote
Bombarde16 Posted August 9, 2013 Report Posted August 9, 2013 When in doubt, read the instructions. Did the bit come with any documentation that specified a range of RPM? Failing that, the general rule is thus: Routers are built with variable speeds to accommodate different bit diameters. Narrow bits can run at full speed, big wide slot cutters or panel raising bits must be run at a lower RPM. With that in mind, looking at Rockler's site and assuming this is the bit in question: ...This looks like the former and I say run the router at high speed. As to what cut quality this will produce, that depends on the stock you're working and how you feed it into the machine. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.