Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

White primer - HVLP

Featured Replies

Love my Fuji Mini Mite 3 with Sherman Williams Pro Classic oil based paint for interior trim projects and built-in cabinets.  Generally 5:1 dilution with thinner seems to leave a very flat surface that is easy to control on vertical and horizonatal surfaces. 

 

The problem I have is with primer.  I can not seem to find a primer that will spray well and lay flat.  What are you guys using for a primer?

 

Thanks!

==> I have good luck with Zinsser

 

+1.  It's a decent shellac base with white pigment.  I've also added transtint and Behlen's alcohol-based dyes -- works well...

  • Author

Thanks for the replies! I had thought to use Zinsser and will try it when I my new wood delivery this week.

Tinted lacquer looks great for one coat. I need to look into that more. I have no lacquer spraying experience to date.

I've never even considered lacquer as a primer under oil based paint for trim.  It's of course first choice for cabinets that can be finished in a shop and then put up, but lacquer would smell too strong for me painting trim in a house.

 

I stopped using oil based paint years ago on trim and doors.  I've never seen any that didn't yellow over time, and latex is so much easier for the homeowner to touch up.  Latex, these days, is so much better than it was some years ago.   I still use oil based primer, so it doesn't raise the grain on bare wood.

 

Since I built rotisseries for spraying doors, they've made it so much easier to get an automotive quality paint job on them.  Also, much, much easier to sand since everything is at a comfortable height.

Its sort of funny how trends vary across the country. Oil has been dead for years around here. Water came in fast and was the latest and greatest for about two years and went away just like someone turned off a switch. Solvents are back and folks are scratching their heads wondering why they ever switched to water.

  • Author

What brand of lacquer are you using and what are you using for tint?  I am going to spray some test pieces this coming week when I set my spray booth back up.  I have read from some other sources that say to start with 70 thinner/30 lacquer and then go to 50/50 for spraying.  Does this seem accurate to you.

 

As per oil - it just worked for me to this point. Easier to control the product and lays flat every time I use is.  Never had any problems using it to this point.  I will say my wife is a lot happier that I made a spray booth in the garage with 3 vents to remove any odor. 

 

Thanks for the input thus far!

What brand of lacquer are you using and what are you using for tint?  I am going to spray some test pieces this coming week when I set my spray booth back up.  I have read from some other sources that say to start with 70 thinner/30 lacquer and then go to 50/50 for spraying.  Does this seem accurate to you.

 

As per oil - it just worked for me to this point. Easier to control the product and lays flat every time I use is.  Never had any problems using it to this point.  I will say my wife is a lot happier that I made a spray booth in the garage with 3 vents to remove any odor. 

 

Thanks for the input thus far!

 

Lately all Ive beed using is Rodda's Crystal Clear Lacquer. I dont tint I have the store do it. You can give the store any color sample number from any major manufacturer and have lacquer tinted that color. You should not need to thin unless your having problems like drying to fast or solvent pop. My shop has been pretty hot lately and I still haven't needed to thin. Dries to the touch in about 5 minutes sandable in 30.

 

When you thin down your going to seal the wood just fine but your not going to get the base color. Really shouldn't matter if your going to cover with paint anyways. For white interior milwork I just spray with white lacquer and follow it up with the lacquer topcoats. Lacquer does not leave you with that thick cheap painted look, on the other hand a few extra coats and you can have the ultra smooth look. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.