Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

dust collector - can you enclose to conceal noise?

Featured Replies

Good evening all, Probably buying an Oneida dust collector. I have been debating whether to enclose to control noise or not? My main thought is to control the noise for house (will be in two stall attached garage) and for neighbors. But the tools I will be using will be just as loud. Thoughts on to enclose or not? If so, will that hurt cooling the motor? Do I enclose the filter as well?

This is a widely debated topic. Take into account make up air, and be very VERY careful if you have a combustion device in your shop (like a hot water heater or furnace).

  • Author

I would enclose it in the same room as it would be used... so the filter would be putting the air back into the shop... no issues there right?

I agree with Rick.  If the reason you want to closet your DC is noise, don't bother.  It's never/rarely the sole source of noise.

 

Nice shop, Rick, what I can see of it.  Makes it obvious why the items I've seen of yours are so nice.

==> The DC is the least of your noise.

 

+1

 

 

Although, I did place mine in an alcove with sound insulation.  The reason is that I don't cycle the DC with every operation -- ie. I turn it on and leave it on for a series of operations, so many times it's the only thing operating in the shop...  Sometimes it runs for an hour or two at a time...  

 

Note: the majority of the noise is on the exhaust side of the unit and several add-ons have been developed to reduce it...

 

So, before building a separate enclosure, I'd look at either a DC silencer (available from many folks -- mine is from Oneida) or a cartridge-filter baffle (again, widely available).  I believe one is a 3db and the other is a 6db drop...

Mine is mounted outside and is still the loudest thing in my shop except the router table that I dont use. Officially your cyclone should be vented outside but I doubt the fire inspector is going to come knocking.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.