Recommended Posts

Posted

I have decided to mixup/upgrade my existing rockwell/delta era 14" bandsaw in the hopes I to put off buying a big rikon saw. Here are my current upgrade plans. Am I missing anything? Or is one of these a mistake to try.

 

1. Replace trust bearings ($20) - http://tinyurl.com/kbm2vfj

2. Replace old black rubber cool blocks with ceramic guide blocks ($24) - http://www.rockler.com/product.cfm?page=6542

3. Replace old Cracked tires with Urethane Bandsaw tires ($50) - (http://www.leevalley.com/US/Wood/page.aspx?p=56043&cat=1,41036,56060)

4. Switch out 1/3hp motor with 3hp motor I have from a table saw. This includes getting new belt pulleys so that the blade speed is ~3000fpm. Probably a new v-belt too. This will easy my mind also because the 3HP motor have a actual tool switch vs a sketchy light switch. ($60)

5. Add Riser block to increase resaw capacity from 6" to 12". Has anyone done this on a old Delta? Would It be hard to retro fit say the $70 grizzly riser block. instead of getting one of the $130+ Delta riser blocks.

6. Get new wood slicer blade that fits the bigger capacity. ($40)

 

All in all I calculating about $260 if I can use the grizzly riser block. Is this good or am I missing something?

Posted

3 hp might be overkill. If you go the Grizzley riser route take a pair of calipers to the block, any unevenness reject it. I think my Carter bearing guides were well worth the money. Replace the upper spring with one from Iturra and a longer crank tension handle is quite handy.

Posted

I know 3hp is overkill but 1/3 hp is underkill. It is also free and just sitting in the corner of the shop. Is there an extension handle you recommend? yeah down the road I think the carter bearing guides, quick release tensioner, and a nice fence are in store. 

Posted
I think you'll need a 3HP for a 14" bandsaw. What work are you planning to do? 14" saws are not for like some heavy duty utilization and not somewhat for a serious woodworking hobbyist. But upgrade is somehow needed. You can actually do many resawing work with just 2HP.  With your other upgrade plans, you're on the right track. Ceramic guide blocks work well and urethane tires too. I have great blades . I have Timber, Lennox , 201 Series carbon blade Haltbar which is good for rough work. 
Posted

 

I think you'll need a 3HP for a 14" bandsaw. What work are you planning to do? 14" saws are not for like some heavy duty utilization and not somewhat for a serious woodworking hobbyist. But upgrade is somehow needed. You can actually do many resawing work with just 2HP.  With your other upgrade plans, you're on the right track. Ceramic guide blocks work well and urethane tires too. I have great blades . I have Timber, Lennox , 201 Series carbon blade Haltbar which is good for rough work. 

 

 

We use the saw for some resawing not a ton though. Blank prep for turnings. Trimming blanks after cnc. Random on general use. It is not the main work horse in the shop though. The workhorses are the Sawstop and the 7.5HP spinal on the CNC.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 49 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined