shann123 Posted October 17, 2013 Report Posted October 17, 2013 This project was supposed to have a project journal but I was not good at posting about it, so it will have to be a showcase instead. http://24.media.tumblr.com/e96172800d31fc465ff19837a1892bbc/tumblr_mscro0r5xe1szpknmo1_1280.jpg[/image] My wife was interested in a herring-bone table and we were in need of a coffee table so I took this as a chance make my second large furniture project, my first with proper joinery. The table is ash and walnut, the ash is locally sourced from a nearby sawmill. There is a small but I'd maple secondary wood and about 70 'loose tongues' of pine (more on those on a second). The design was my own and I took the off-center placement for the chevron strip straight from Jim Walker's blog post about majors and minors. The biggest problem I was worried about was wood movement in the chevron strips. I placed the chevron components so the movement was vertical to avoid having the table blow up. To compound the problem was that most chevron construction walkthroughs online just glue slats down to a substrate but I didn't want to do that. That meant I cut a groove in almost all the chevron pieces and glued a 'loose tongue' in each groove to strength the joints. This means there are over 100 pieces of wood in the table, much more complex than I expected. Sorry for any typos, sent from my phone. Which also means I was having trouble with photos, hopefully I put up at least two. Quote
..Kev Posted October 17, 2013 Report Posted October 17, 2013 Sweet looking table! Hope you post some other pics! Quote
TRBaker Posted October 17, 2013 Report Posted October 17, 2013 Nice looking table, shann. Welcome to the forum. Quote
Guillaume Breton Posted October 24, 2013 Report Posted October 24, 2013 is there an "easy" way to make cevrons like this ? you glue the 2 plank at 90 then rip them again and put them back to back ? hmmm tryong to figure it out ! i like it, very nice work Quote
woodieboy Posted October 24, 2013 Report Posted October 24, 2013 Sweet table! I like the details of the top! Great job on it. Nice wood combination. Very well done. Quote
shann123 Posted March 3, 2014 Author Report Posted March 3, 2014 Very late reply, but thanks! Been kinda offline for a while.Sent from my RM-877_nam_att_205 using Tapatalk Quote
shann123 Posted March 3, 2014 Author Report Posted March 3, 2014 Guillaume, if you want the chevrons to meet in a point you could definitely glue first then cut at an angle and reglue. Sort of like quilting. I'm not sure how to streamline the stair-step look I went for.Sent from my RM-877_nam_att_205 using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.