Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

keeping a walnut board lighter (do not want dark)

Featured Replies

Does anyone have recommendations on how to keep a walnut slap as light of color as possible?  This is for a bench and the unfinished wood is quite mellow- almost creamy.  I have tried watering it to see what it might look like finished, and it get's fairly dark.  I'm hoping to avoid this.  Should I use a sealer of some sort?  Plan on finishing it with some sort of poly, and leaning towards GF water borne poly but would take recommendations on that also.  

Many thanks crew. 

I could be wrong, as I have not tried every finish out there, but with those I have tried there was always a significant darkening. No matter if it was straight shellac, sanding sealer (or as paul sellers calls it...diluted shellac), and polyurethane (wipe and spray).

A water bourne finish is your lightest option. It's going to darken some with any finish. Sunlight will fade walnut a bit over time. You could do a test with some scraps and a diluted wood bleach. Butternut is in the walnut family and has a similar grain with a much lighter color. It's not as easy to find but that might be a solution for you next project.

  • Author

thanks guys.  I think i will go with a water based solution.  Any special tips?  I understand I will have to work fast.  the piece is 24"x 6'.  i'm a novice.

To prevent wetting and darkening I would spray on very thin coats and lightly sand or buff with a white abrasive pad between coats. Don't have a sprayer? Very thin coats with a rag or a foam brush.

Please post pictures of the results. I have been doing this for over 34 years and I posted a question the other day, got the info I needed and intend to post pictures of the results, that way we all learn from the process!

I hope your project turns out well.

  • Author

i will certainly post when its done (i don't move quick).  last question for this one.  If i use a water based sealer (GF Enduro), can i then use an oil based finished if decided to?

i know you are trying to keep it light, but a really thin coat of dewaxed blonde shellac (like zinsser seal coat) might help warm it up a little without substantially darkening it.  try it on a test board.   walnut under a water base can look really dull.  The seal coat might be just enough to make the grain pop a little bit without darkening too much.  You can put just about anything on top of it.   And it seems there is some debate about this, but my understanding is walnut does tend to lighten a little big with age (it starts out purplish when first milled, gets dark brown when freshly finished, then mellows to a more medium brown).    just something to consider.  

i will certainly post when its done (i don't move quick).  last question for this one.  If i use a water based sealer (GF Enduro), can i then use an oil based finished if decided to?

No, you cannot use a water based finish over a oil based finish. Unless you do a barrier coat with shellac.

  • Author

Tkf - is the opposate also true - that i can't use an oil based finish OVER a water based sealer?  the reason i'm thinking water based sealer is that folks recommended water based since i was looking to minimize darkening of the wood.

Use a barrier coat in either case with oil and water based finishes. Super blonde shellac is also a good choice as a sealer. Most oil based finishes are going to add an amber tint, lots of folks see it as warmth.

  • Author

Thanks all.  And to Woodsap, whose response I skipped over previously.

 

purchased some Zinssers and Arm-r-seal last night.  May also try some Crystalac as well.  lots of firsts for me on this project.  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.