Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Spraying built in wardrobes

Featured Replies

Hi all

Recently purchase an Earlex 4500 for spraying tasks in my small home workshop. We are currently doing up our spare room and turning it into the master bedroom. Leaving a whole bunch of built in furniture in the new spare room.

I want to respray all the built furniture. I think it's made of either MDF or some type of blockboard. It's got a very shiny thick film on it that looks really plasticky.

What should I do to prepare for spraying or can I spray straight onto that film?

Any advice would be appreciated. Thank you.

Dave

In Sherwin-Williams stores you can find rolls of very thin plastic that will cling to the walls to mask them off.  It's much simpler, and easier, than using masking tape on places not adjacent to the painted edges.

 

It comes in different size rolls.  Even the big rolls can be held in the palm of your hand, since the plastic is so thin.

http://www.homedepot.com/p/Easy-Mask-9-ft-x-400-ft-Cling-Cover-Plastic-Sheeting-79400/203490675#.Uod2ZKso4cA

 

I even use if when I'm plastering a ceiling to keep slobbers of the walls.

I think the film you are referring to is thermofoil. They basically shrink wrap the MDF with plastic sheets. I would do a few tests first but de- glosser or liquid sandpaper might prep the surface for paint. A good primer might be smart. Be careful around edges and any nicks as the plastic could lift if the glue dissolves.

De-glosser is basically a solvent that etches the surface so the paint can stick. Follow the directions on the can, but I think you just wipe it on with a rag.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.