Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Design Review for Entertainment Center / Desk

Featured Replies

There isn't a design section, so maybe this is the place for this. I'm designing an entertainment center/desk and am looking for some input. It will support a 32" TV that doubles as a monitor for a MacMini. There is a 1 inch board directly below the top of the case that will pull out to support the keyboard and other desk paraphenalia. There isn't a ton of storage, but in the post-CD, post-DVD era we don't really have much to store aside from the Mac, and an external hard drive.

 

Design motifs - I've based the design off the Queensboro Bridge in NYC. We used to live in an apartment overlooking the bridge.

- I've simplified the geometic pattern of the bridges trusses on the drawer front.

- I've used pegs throughout inspired by the bridge's rivets

- The arches in the legs are similar to those in the base of the bridge

 

Questions:

1. I've used "pegged miters" for top case joints. I've never seen this used before. Think it's stable enought for a 32" TV?

2. The TV will be putting quite a bit of weight on the base, but do you think tipping will be a problem with a little weight on the keyboard tray?

 

Thanks

 

Paul

post-6563-0-56941900-1386476637_thumb.jp

post-6563-0-12899800-1386476646_thumb.jp

post-6563-0-35642600-1386476717_thumb.jp

What are the dimensions?

 

Looks sturdy enough to support the tv but, I would be concerned about it tipping forward too easily.

  • Author

31" H x 32" L x 15" D. Maybe anchoring it to the wall is a best practice regardless of the desktop, considering we have a toddler.

Anchoring to the wall would definitely be good idea!

 

Looks pretty cool!

That miter that supports the bottom of the case looks pretty cool. I don't see a problem with the overall strength for the uses you suggested.

  • Author

How are you going to support the shelf when it's at full extension?

I was thinking about undermount drawer slides.

-->  1. I've used "pegged miters" for top case joints. I've never seen this used before. Think it's stable enought for a 32" TV?

 

I've done this before on picture frames, not on a case joint.  I will say it can be tricky to glue up.  Once you start banging on the pegs you can knock the joint out of alignment.   A mitre joint that long is difficult enough to join precisely. 

 

Splines are probably easier than pegs, in terms of glue up and assembly, but given the size of the case might be difficult to cut. 

  • Author

I've done this before on picture frames, not on a case joint.  I will say it can be tricky to glue up.  Once you start banging on the pegs you can knock the joint out of alignment.   A mitre joint that long is difficult enough to join precisely.

 

I'm considering getting the Woodpecker boxclamps and hoping those can hold the miter together during the gluing, drilling, and peg pounding.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.