ChetlovesMer Posted December 29, 2013 Report Posted December 29, 2013 Don't know if you all are aware of this yet, but Jet introduced another new bandsaw. I've been pondering a new bandsaw purchase for a while so this showed up on my radar. Jet's 14" model looks to me to be a direct attack at the new Powermatic bandsaw they released about a year or so ago. http://www.jettools.com/us/en/p/jwbs-14sf-14-steel-frame-bandsaw-1-3-4hp-1ph/714500 Looks to be priced right around $1800-$1900. Curious if any of you have seen one of these in "real life"? Quote
Janello Posted December 29, 2013 Report Posted December 29, 2013 I was going to purchase that model but recently went with this one because I wanted more HP for resawing. Both great saws either way. Just depends on budget and if you can get 220V to the machine. Quote
tim0625 Posted December 29, 2013 Report Posted December 29, 2013 I was going to purchase that model but recently went with this one because I wanted more HP for resawing. Both great saws either way. Just depends on budget and if you can get 220V to the machine. I have an 18" jet about like Janello's that I got for $800 slightly used and I'm moderately happy but it only has 1 1/2 hp. Chet, if you're considering resawing, I'd take a good look at this one Janello purchased because mine is underpowered. Funny thing...I called jet and inquired about upgrading the motor and they said I'd need a new magnetic switch (mine is 110v and the new motor is 220v) - something like $150....a new pulley and motor and it all totaled close to $1000. I smiled and said thank you but I'll stay with my present HP. I'm sure there are cheaper ways to upgrade but that was cute to hear - the representative was very informative and really thinking this was a good thing for me! I wish mine had the quick release too. Quote
dwacker Posted December 29, 2013 Report Posted December 29, 2013 My son in law has the 3 hp 18. It had too many issues with the light duty tensioner and just gets used with narrow blades. Quote
ChetlovesMer Posted December 29, 2013 Author Report Posted December 29, 2013 Good feedback, PB. Sorry to hear your son in law had issues. Quote
Janello Posted December 29, 2013 Report Posted December 29, 2013 PB- I'd be interested to know if your son in law has the same model as I posted, because I wouldn't consider the tensioner on mine to be light duty by any means. It came stock with a 3/4 blade but can accept a 11/2" wide blade. Quote
dwacker Posted December 29, 2013 Report Posted December 29, 2013 PB- I'd be interested to know if your son in law has the same model as I posted, because I wouldn't consider the tensioner on mine to be light duty by any means. It came stock with a 3/4 blade but can accept a 11/2" wide blade. Yes and the tensioner is light duty by bandsaw standards take a look at some saws actually built to tension 1 1/2 bands. I knew this when I bought him the saw and is the reason he bought himself a 24" powermatic and the jet has become a goto for curves. Still a good saw just the typical exaggerated specs. Quote
Janello Posted December 30, 2013 Report Posted December 30, 2013 aye, I'd agree. I don't think I'd wanna try spinning a 1.5" blade although it says it can. The 24" powermatic is a whole new animal though. That's a 4-5K saw! : ) Quote
woodieboy Posted January 3, 2014 Report Posted January 3, 2014 The resaw capacity and overall specs looks great. If that is the kind of saw that you think would meet your daily job, get it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.