Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Contractors Saw Dust Collection Tips

Featured Replies

Been away from woodworking due to elbow tendonitis.  Seems dust collection has come a long way so I'm revisiting mine which is probably considered "chip" collection these days.  Anyway, I have a Delta 50-850 1200 cfm with Oneida 1 micron bags.  I'm running 2 gated mains of 4" PVC.  One leg (18' long) goes to a jointer, miter saw, router table and drill press in that order - all gated.  The other leg (8' long and gated from the other leg) is straight to my table saw using a PVC elbow.  

 

Budget prohibits and new DC but I want to improve things where I can.  At this point I am focused on my TS which is a Jet Cont Saw - photo below.  I see there's several methods of improving collection from treh bottom/back of these type saws.  Some have connected a box to the back that houses the entire motor.  I also see some have removed most or all of whatever they had sealing off the back and installed a sloped unit like this that directs the flow toward the DC intake.  Have any of you had success in improving DC in these type saws?  Thanks!         

post-14962-0-24115200-1389368517_thumb.j

I was at a job site a few weeks ago and the trim guy had what looked to be the same saw. It had a plastic bottom with a 4" port and just one of those single bag dust collectors from rockler sitting on the ground. The plastic port covered the whole bottom of the saw and seemed to be doing a good job. The port was in the center and appeared to be factory I didn't ask.

This was in the weekly news update that I get from Wood Magazine. Might help?

 

 

 
ss_BuildYourBase.jpg
Build your own base.

There's no law that says you have to use the steel leg stand that came with your contractor-style saw. Replace it with a simple cabinet, such as the one shown, and not only will you add enclosed storage; but your saw also will run quieter. For a more elaborate and versatile take on this concept, visit woodmagazine.com/tsbase.

Ha! I remember that photo from Wood magazine, it's from the early 2000's I think. I have the issue somewhere, probably in my shop. But yes, that's basically what I had in mind with an interior ramp that feeds a dust port and maybe a small door in the front for storage. Except I'll paint mine grey to match the saw and fashion a nicer handle.

Yeah, I thought it was a mini fridge when I first saw the picture. The fridge might not be a bad idea, but doubt if it would help much for DC.

  • Author

Thanks for the replies and link.  I'm going to do some measurements and pickup the "Gulp" from Amazon if the size works.  This is whats on the saw now - it doesn't do a good job as the dust piles up around the hole.  I have also been experimenting with removing some of the material I used to close-off the back of the saw.  By completely closing off the back I cut down on the air flow therefore hindering flow to the 4" port.  For now I going to remove what's on there and install (or build) a "Gulp" type chute or ramp and see how it performs.    

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.