WillieIV Posted January 24, 2014 Report Posted January 24, 2014 I'm having issues with my feed belt always tracking to the right on my drum sander. I've made the adjustments per the manual with no success. I talked with a grizzly rep this morning and although helpful I'm a little suspect of his suggestion to continue adjusting tension screws past what I feel is normal. I'm wondering if there's some other issue causing this. Anyone else fought this battle? Bill Quote
dwacker Posted January 24, 2014 Report Posted January 24, 2014 Take the belt off clean the rollers and flip the belt. If you have the same issue going the other direction then you need a new conveyer belt. Quote
WillieIV Posted January 24, 2014 Author Report Posted January 24, 2014 Thanks PB. Isopropyl Alcohol to clean the rollers? This is a new belt so I hope it's not bad. Quote
dwacker Posted January 24, 2014 Report Posted January 24, 2014 Thanks PB. Isopropyl Alcohol to clean the rollers? This is a new belt so I hope it's not bad. I dont know what your rollers are made of so can't suggest a cleaner. Maybe just some simple green, just make sure there is not a bunch of dust stuck on one of them. Its common to get a bad belt new with those sandpaper belt they are not really conveyer belts. Quote
WillieIV Posted January 25, 2014 Author Report Posted January 25, 2014 Reversed the belt and that in combination with the grizzly techs advice seemed to work. I'm amazed by the amount of adjustment it takes. Tip to anyone else fighting this is turn the belt speed up to speed up the adjustment process. When you get close to having it right nothing more than a 1/4 turn is all that's needed to keep it at center. I'm folically challenged as it is and this didn't help! LOL Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.