Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Wipe-on varnish in tight spaces?

Featured Replies

Hello Everyone,

 

First post. I'm a podcast fan and today I ordered and watched Marc's video, "A Simple Varnish Finish." I have only used finishes such as Danish oil and shellac, so this was great, I enjoyed it and learned a lot. 

 

I'm sorry to be so needy, but I was wondering if anyone has additional advice. My problem is this. I am building a sapele bent arm Morris chair and want to use this finish (wiping varnish). However, the chair and ottoman have 50 spindles (34 chair, 16 ottoman). I just got some fantastic advice - to finish the spindles before assembly. This is so smart and perfect, but the problem is... I received the advice a few days after I assembled. 

 

I'm worried about working in the tight spaces with all those spindles (and the space between them) - drips, runs and other issues. From Marc's video here is what I am thinking miight make things a bit more forgiving when finishing the spindle portion of my chair. Say I am using General Arm-r Seal.

 

Choice 1. Use Marc's final coat advice of 75% naptha and 25% wiping varnish on ALL coats on the spindles (and spaces between). Very thin, quick drying should avoid problems.

Choice 2. Use Marc's advice for mixing a little oil with my wiping varnish when working on the spindles. Easier to apply and less chance of problems?

 

Is either a good strategy or is there something else I could try?

 

Thanks in advanced. Pic of the chair and ottoman attached (arms and back in the works)

post-15097-0-46261900-1390596321_thumb.j

I wouldn't really worry too much about changing the formula of the finish. Thinning, while possibly causing the finish to set up a little faster, also makes the finish runnier and requires you to apply more coats. So that's not really doing you any favors here. I would simply modify the application strategy a bit. Instead of trying to do a perfect "wipe-on", you might consider using a brush to flood the spindles. Then come back with your clean cloth to wipe away the excess. This should allow you to move quickly from one spindle to the next as you move down the line. You'll have to watch for drips of course but that's why you have the wiping rag in your other hand. And i wouldn't thin the finish at all since you probably want to build up a finish in as few coats as possibly to limit working in such an inconvenient area.

I always put Arm-R-Seal on with a brush and wipe off with a cloth.  I used to try to put it on with a cloth and then always found I would end up going for a brush to get to some inside corner that I was having a hard time getting with the cloth.  Eventually rather than switch between the two I just used the brush and that works for me.  The thing to watch out for is that your wiping cloth can end up getting too soaked with finish because you're also using it to spread around a too heavily applied finish.  It's not so much a problem on the first coat but after that you have to learn how much to put on with the brush.  Leave yourself some dry areas to spread the finish into, after the first coat.  If the cloth gets too soaked you end up leaving excess finish whenever you pass over an edge.

  • Author

Thanks Mark and krtwood. Sounds like I was in a classic case of thinking too much. I'll keep it as is and have plenty of cloth around.

 

One last question? If I use gloss for all sub coats and satin as the top coat, do I stick with the same approach for all coats on the spindle - no thinning?

  • Author

One more one last question?

 

Does the satin over coats of gloss thing really really work and end up satin? You scare me with this one. :-)

The idea of it is that multiple coats of satin or whatnot may start to cloud the grain underneath with each subsequent coat. Someone on here had a good analogy recently (which I'm probably messing up) where if you put multiple coats of pink film over one another, it would be harder to see through the stack, whereas using multiple coats of clear film and putting a pink film on top would achieve more clarity. Same deal with using gloss to build up and using satin on the final coat.

  • Author

I get it JMP and it makes sense, thanks. What's funny is this is a perfect opportunity to sell more varnish, but I have not seen this explained on a product label or at an online/brick and mortar store.

The idea of it is that multiple coats of satin or whatnot may start to cloud the grain underneath with each subsequent coat. Someone on here had a good analogy recently (which I'm probably messing up) where if you put multiple coats of pink film over one another, it would be harder to see through the stack, whereas using multiple coats of clear film and putting a pink film on top would achieve more clarity. Same deal with using gloss to build up and using satin on the final coat.

 

Personally, I think the whole gloss base coat thing is drastically overstated. I have done side by side tests and I can't tell the difference. To be fair I was using a high quality non poly based varnish. Maybe if you are laying down a really thick finish for a bar top or something it might have an effect.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.