CubsFan Posted October 19, 2010 Report Posted October 19, 2010 So I was just using my router and ended up with a small (but very annoying) amount of burning. I know that not moving the router/wood fast enough can cause burning, but can cheap router bits also cause it? The majority of my router bits are a cheap-ish Craftsman set. I'm replacing the more used ones slowly with much better quality, but for the large number of bits I almost never use, the price was right. Thanks! Quote
PaulMarcel Posted October 19, 2010 Report Posted October 19, 2010 It could also be the type of wood; some will scorch more easily than others or you hit a bit of resin. Clean the pitch off the bit with Simple Green after each use and you shouldn't have a problem. A dull bit generates more heat. Couple other ideas: on a wood that is prone to scorching, definitely keep the bit moving, but also wet the area with mineral spirits first. It will take the heat and evaporate so the wood doesn't. It isn't a miracle cure, but works. Also, if you are doing a profile, don't run it at the full profile depth. Afterward, set the bit for the final very light pass and run it. You can go very quickly when skimming 1/16" or less off so no time to scorch plus the bit won't get nearly as hot. Quote
mikem Posted October 19, 2010 Report Posted October 19, 2010 A dull bit can also cause burning as well. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.