Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Help with SALVAGED WOOD TRESTLE FINISH

Featured Replies

Hi -

     I have been working with wood all my life and really enjoy it and have always strive for nice finishes.  But right now I am trying to find this Restoration Hardware brand table.  It is supposed to stay weather with a  distress look . I cant figure out how they did this stain I have tried everything oil and latex stain I have and now trying a mix of using vinegar and steel wool mixed and add  brown latex so it doesnt come out grey it comes close but doesn't  make it.  

    I had to take the old finish off  and now i  have to make it look old looking again and  match this color light faded brown and match the legs  . Of all my 40 plus years of woodworking I find this impossible to do. And ask a bunch of people in stores and online and they dont know how it was done iether. Maybe its a secret at RH -Restoration Hardware and will not tell but some body must know how this is done .  I read there made in china.  Please Help see link below of how it looks.

Thank you  Randy

SALVAGED WOOD TRESTLE 

 

post-15581-0-34041000-1399664820_thumb.j

In my estimation that wasn't made to look old, that is old. The ragged fibers are from being rough cut in the green. Those rough fibers lead to an irregularity of tone through irrugularity of texture. The rough fibers would be nearly impossible to strip once stained without removing all that character through planing or sanding. These boards have weathered somewhere for a few years. Your best bet is to source weathered wood.

I am going to amend my statement and say aged instead of old. I would like someone here with the right equipment to do an experiment for me. What happens when you distress with UV without all the moisture variation of an outdoor climate. Can you achieve this graying with a tanning bed?

I am going to amend my statement and say aged instead of old. I would like someone here with the right equipment to do an experiment for me. What happens when you distress with UV without all the moisture variation of an outdoor climate. Can you achieve this graying with a tanning bed?

That's a great question! Some of the greying may also come from oxidation from other environmental factors. The piece pictured by the website shows a good amount of cracking, like what you see when wood is dried too quickly...

 

I like this from the website on their round pedestal table: "Handsomely distressed, our table is crafted of substantial pine timbers and supported by a hand-turned pedestal leg"

 

Hand turned, lol, the pedestal base is a square - wonder how they turn a square?

I have done quite a lot of digging over the last few months because this question seems to recur with a moderate frequency. The only convincing grey schemes I can see documented are quite opaque and build up on textured surfaces. I agree with your assessment of the look but I still think there must be some chemical way to get color stripping without loss of fiber integrity. This is what makes me curious about manufactured UV.

I have done quite a lot of digging over the last few months because this question seems to recur with a moderate frequency. The only convincing grey schemes I can see documented are quite opaque and build up on textured surfaces. I agree with your assessment of the look but I still think there must be some chemical way to get color stripping without loss of fiber integrity. This is what makes me curious about manufactured UV.

I don't think that the factory would take the kind of time it would require to age the wood with uv lamps. It doesn't look like paint either, I agree with Mike, I think its a combination of water base dyes sprayed on and wiped off. Quick, uneven tones, varied absorption and off to shipping ;-)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.