Ian Gagnon Posted May 12, 2014 Report Posted May 12, 2014 Hey everyone. I recently rescued a Powr Kraft hand plane (mid 1950's, perhaps early 1960's). Other than the Powr Kraft stamp on the lever cap, there is only one other marking on it. It is fairly hard to see/read, and could either be a 9 or a 6. It was pretty nasty and neglected. It was left in a metal tool cabinet with the iron extended, edge down and has been bumped and jostled around for decades in this fashion. Some elbow grease has cleaned it up nicely. The sole is flat and the hardware is all there, but the iron/chip breaker are probably just in need of replacing. The amount of grinding I would have to do to get it back to working is substantial, and my free time is not! Hahaha. I've done a bit of snooping online, but since I'm not a hand tool guy I'm having a bit of an issue disseminating the information I'm finding into useful "facts" and internet flotsam. Who would you suggest is a good company/individual to contact about a replacement iron? The local Woodcraft just stared blankly at me when I talked to them, and they're the only game in town for a local place. If I'm going to contact someone via email/phone who is going to, at best, get some pictures from me, I'd like to talk to someone that really knows their stuff. Thanks for your input, this "power tool" guy really appreciates it! Quote
missioninwood Posted May 12, 2014 Report Posted May 12, 2014 There is a lot to this. Overall, it depends on what you hope to do with the plane. I have commended guys for buying a rusty old No. 3 from a Swap Meet for $5 and in the same breath warned them about the 100 hours it could take to refurbish it. A new iron and chip breaker are probably available (it'll cost you upwards of $100), but some cases the plane body and/or throat may need to be modified to work properly. Additionally, there is a valid argument for laying out the cash for a quality handtool. If, like you say, you have no time but want to start experiencing the benefits of handtools, I would recommend a new plane. Even the Wood River planes are decent and WC does occassionally have them on sale. miw! Quote
Ian Gagnon Posted May 12, 2014 Author Report Posted May 12, 2014 Thanks for the input! I have my eyes on a few Lee Valley items at the moment. I will be adding some new toys later in the year for sure. As for my free time... I do have some and I'm not completely adverse to a few hours of work. I regularly work 60-80 hours a week at my regular job and then go freelance on my time off, so work I can do. Lol!!!Perhaps I'm better off working this iron as much as I can and seeing how good I can get it. If it ends up not working out, at least it was good sharpening practice for when I buy a new plane later this year!Sent from my iPhone using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.