Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Lacquer as sealer question

Featured Replies

I'm looking to spruce up a cutting board using this technique:

http://www.woodsmith.com/files/issues/173/adding-an-epoxy-inlay.pdf

 

My question is this. I finish all of my cutting boards with mineral oil and beeswax. According to this article, they suggest spraying a coat of lacquer to seal the wood before applying the epoxy. As I don't want that epoxy on the surface of the cutting board, is it easy to sand through or will it absorb fairly deeply into the wood?

 

I'm not that familiar with sprayed lacquer, so I don't really know its tendencies.

 

Thank is advance!

 

scott

$64 question -- is the cutting board going to be used as a cutting board or as a counter-top decoration?

 

If you use a cuttingboard the way they get used around our campfire, then inlay (regardless of technique) isn't going to last the season...

 

I've used epoxy as an inlay technique many times -- expecially when my principal inlay material is Gaboon Ebony and little chips, cracks, gaps develop... Graphite powder + 207 is a great inlay material -- when sanded/polished, you can't tell it's not Gaboon Ebony -- completely indistinguishable fill/repair...

 

Lacquer as a sealer --- yea, but you've got to be careful with epoxy. Lacquer will work with close-grained stock, but won't help open-grained much...

 

Personally... Get yourself some scrap tight-grained sugar maple, 207, graphite powder and a rattle-can of Deft -- give it a whirl...

I'm not sure how lacquer will behave under cutting board use. Might tend to flake off and contaminate the food. Perhaps a safe sealer would be shellac. If made from natural flakes and 'Everclear' pure grain alcohol ( not denatured ) it is acually edible. In fact, shellac is used as a confectionary coating for many candy products. Just don't use a pre-mixed shellac, as in Zinsner Bullseye. They add a 'secret ingredient' to give it more shelf life, which may not be so food safe.

  • Author

HHH-- Color in the epoxy will be the inlay. I don't plan on gluing in another material...just the epoxy. Are you suggesting that the epoxy will chip and crack? Would a casting resin be better?

 

WTN-- I don't want the lacquer on the surface at all, just in the relief area. If I spray it, I want to sand off the surface to remove the lacquer.

 

Another way to ask this might be how can I seal the relief area, but not the surface? Could I apply a mineral oil and beeswax mixture to the surface and then spray some lacquer? 

 

Maybe experimenting is the best plan? Maybe this is just a dumb idea.

==>Color in the epoxy will be the inlay. I don't plan on gluing in another material...just the epoxy

I get it... I don't use it as a stand-alone inlay material. When you inlay with Gaboon Ebony, it's quite brittle and small cracks, gaps, etc develop. I use epoxy as a filler. It finishes the same as Gaboon Ebony. You can certainly use it as an inlay material -- no problem...

 

But my overall question still stands -- if you use the board for actual cutting, the inlay wouldn't survive long-term... Is it a cutting board or decoration...

  • Author

I was planning on usable. In fact, I was concerned the epoxy would be more dense than the wood and the wood might wear quicker and leave a ridge.

 

You don't happen to have a photo laying around of how it fails do you?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.