Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Fixing knots with epoxy and oil based finishes

Featured Replies

Hello everyone,

I'm about to finalize a tabletop for a garden table made from douglas fir. I used wood that I acquired from some guy nearby who sold the remaining bits from a tree that was chopped down a couple years ago. The wood wasn't particularly pretty and included several defects (but it was very cheap and thus ideal for my first table). Planing the stuff was a nightmare and cutting around the knots not much of an option as I had barely enough wood. The result is simple: I have a few knots with voids in the top and I'd like to stabilize them. It's a bit late for plugs (some are too large anyways) thus making me think of epoxy.

I want to use an oil based finish ( usually used for decking) and already applied to the accompanying benches.

Will this work with epoxy? Any experiences with what this will look like?

Any help would be greatly appreciated.

Cheers from Aachen

Guido

Tape off the surrounding areas before you use the epoxy. Be thorough and sometimes I mask with layers of paper to keep the epoxy from dripping in the wrong places. You can mix sawdust in to keep from having a clear filled area. I also have taped up the underside to keep it from dripping out.

  • Author

Regarding the finish: it's an oil (linseed oil with same siccatives and other additives and a bit of pigment based dye). Poly isn't that popular here.

I'll make a sample to work out the colour difference. However, My experience with epoxy (fibreglass and CFRP) tells me to be careful when mixing stuff with epoxy;).

I'll try to remember to report back... Now back to planning another project: king size bed which is supposed to be stained black. I have acquired a reasonable amount of freakish expensive but very nice oak and intended to apply the vinegar/ steelwool method. Now though I started second guessing everything and I'm considering poplar for the bed and commercial black stain to safe the oak for a dinning table. ... Hate that process of constant reconsideration;)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.