Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The finish both sides of a top rule - how far does it go?

Featured Replies

Hi Everyone. I made a 7' long x 2' wide table top that is going on a metal frame. Five boards and (this is a little weird) they are cherry, qs oak, sapele, walnut and another cherry. Depending on your taste, it came out nice. 

 

I have always heard that you need to finish both sides of a top to prevent warping. I learned this once the hard and painful way on a much smaller piece. My finishing plan is this. 2 coats of BLO followed by dewaxed shellac (Zinzer seal coat - does nice things for depth and color in my experience) followed by probably three coats of Arm-r-Seal gloss. I have oiled both sides already, but do I really need to do everything, all coats, on both sides? I was thinking skipping the shellac on the bottom side and maybe 1 or 2 coats of Arm-r-Seal. Or am I being a impatient and should I do it all? Thanks in advance. P.S. I have made a set of blocks/cleats to screw the top down - they have slots for the screws with washers to allow for wood movement.

  • Author

Thanks TIODS, but just to be clear, you think I would be fine with the oil and 1 or 2 coats of arm-rseal on the back/bottom? Correct?

Thanks and sorry for being OCD!

There are others here with much more finishing experience than I but, that's the way I'd do it.  

Your top will take abuse (soft maybe, but still abuse. Think sun damage etc.) Because of this we often over finish the top. The finish we put on the backside only really keeps humidity migration more constant all the way around. I am not sure there is a benefit to oiling the bottom under the Arm-R-Seal but it won't hurt any thing. I have some very old furniture that appears to not have been oiled in these places.

  • Author

Thanks C Shaffer (and TDIOS). That makes sense. My previous warping experience of a small top was right after I oiled it, so I have this irrational fear even though it may have been just a coincidence or who knows what. Sealing from humidity... Makes perfect sense. I feel kind of stupid now, but I the way wood can act or move is, to me, one of the most important yet difficult to learn things about the hobby. Thanks!

What I do is finish on those pyramids or homemade nail blocks. Put a coat on the bottom first, then flip it onto the pyramids and finish all 4 sides then the top. Repeat this with every coat, why not it doesn't add any drying time?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.