Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

CN Blotch over epoxy?

Featured Replies

I have a nickel sized, 1/16” deep tearout in a birdseye maple table top. I’ve sanded it out partly but fear it will be a ton of work to sand down the full diameter required to hide the mark (I’ve done about 2” this far).  this happened due to my inexperience with a plane . I will be staining the maple with a relatively dark TransTint dye over Charles Neil's Blotch Control.  I am thinking of leveling it out with epoxy prior to spraying the dye stain, followed by Arm-R-Seal topcoats. Thoughts? I am hoping given the dark dye (Dark Vintage Maple) the epoxy outline/blemish won’t be too noticeable? Would appreciate if someone can confirm the dye OVER epoxy (West Systems) is safe/smart?   Or maybe the right question is does CN Blotch bite into Epoxy?.  I have bought the Earlux sprayer for this project (based upon Marc's review).  The amount of color is a bit tbd at this point, so i am hesitant to dye the epoxy.  and I figure it would be easier (better?) to dye it all at once rather than have dye in the epoxy also.  But that is what I hope to confirm on this forum!

 

Thanks as always. 

Not sure, but whatever responses you get be smart, do some testing on scraps first ! I always save every scrap on a project just to use when finishing as test boards.

I plane and sand the scraps every step / grit etc then I have something to use for test cuts and then finish them the same as the project. Now when I find a flaw I can test the repair on a finished scrap before I attempt to fix the flaw where it really matters!

Steve is spot on!  Only way to know for sure is to test.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.