Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Building a Lumber Buying Video Series, Call for Input

Featured Replies

I hope I haven't misled here, I do agree with you guys and have always bought the whole board, the guy at crosscut basically offered to cut a bit off the top of a long board if I wanted him to as long as the board was still at least six feet long.  I did not actually do this, but bought the whole board instead, I was just saying that he offered and was wondering if that was usual.  I see now that it's not likely normal and probably depends on the species too (this was red oak). 

I am a big fan of Craigslist. I hadn't even considered it until a fellow woodworker mentioned it at Fine Woodworking Live. Since then I have gotten some beautiful Walnut (5/4 rough), 4/4 S3S Maple, and a load of S4S Cherry from a guy who works for a custom commercial cabinet maker. It is stuff that either is left over or in the case of the Walnut, the customer changed his mind.

 

Another load of mostly walnut is from a retiring woodworker who is liquidating his shop. I also found some genuing Brazilian Rosewood and Macassar Ebony from a retiring silversmith who used it for accents, handles, etc. The rosewood was purchased befor the 1964 ban on importation.

 

The best find was from a woodworker who unfortunately was having a rough patch and needed to sell about 3,000 BF of maple - much of it spalted,  "ambrosia" or figured, brown and white ash, some cherry, some black locust and small amounts of other native woods. They are all air dried and range from 4/4 to 8/4, all rough. There are a couple of full logs which are 8/4. The seller actually cut some of the wood with a chainsaw mill and others were cut with a Woo-mizer type of mill.All were locally sourced.

 

Well, those are my stories and I'm sticking to them!

My personal anecdotes from buying rough cut lumber

 

 

1) go into it KNOWING how to calculate board foot, or at the very least, have a calculator tailored for it (plenty online). I have had people "rip me off" and drastically undersell because they had no idea how to calculate board feet and screwed the numbers up.   

 

2) definitely understand the "4/4" vs "1 inch" thing. Before I knew lumber, I was QUITE PISSED when my "1 inch" board was really 6-7/8" thick. 

 

3) please discuss courtesy of sorting lumbers. I was at a local lumber yard, watched this guy literally tear a cord of wood apart, and left his mess. I said something to him, and he just shrugged me off and walked away. A definite ... *insert choice words here*

 

4) bring a planer, scraper or razor blade! Some woods are very fuzzy and have no discernible grain when rough cut (walnut...) and most lumber yards will let you plane some top off to see the grain.

 

5) ALWAYS BUY OVER SIZE. ALWAYS BUY OVER SIZE. ALWAYS BUY OVER SIZE. ALWAYS BUY OVER SIZE. ALWAYS BUY OVER SIZE. ALWAYS BUY OVER SIZE. ALWAYS BUY OVER SIZE.  for the love of god ... .ALWAYS BUY OVER SIZE.

 

6) if you dont need contract grade selections, ALWAYS ask if they have an "offcut" section. I've gotten quite amazing deals buying "off cuts" that served my purposes fine. 

 

7) ask about their drying process. I have a wood hygrometer I bring with me, but occasionally, some snarky butt hole will tell you his wood is "kiln dried", only to wind up being 25-30% RH.  If they are confused when you ask this question, its probably not a good sign

 

8) ALWAYS check your local yards before buying online. There are VERY FEW online vendors that dont completely rip your behind off in pricing. I blame the consumer ignorance for this price gouging, but hey, people CLEARLY pay 300$ for a nice piece of maple you can get for 20$ at your local lumber yard! 

 

9) my BEST SCORES have definitely come from craigslist! 

 

 

I build guitars, so my "needs" are definitely different from those say a "framing carpenter", for sure. I can ONLY use the best of the best woods, usually with exotic figuring as well. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.