Mzdadoc Posted January 11, 2015 Report Posted January 11, 2015 I know that the blade safety guard isn't ideal for a dust collection hood but have any of you done it or thought about cutting a hole in at the top to add a hose just to get most of what goes in your face? Quote
drzaius Posted January 11, 2015 Report Posted January 11, 2015 The SawStop blade guard reportedly has good dust collection. I wonder if it could be fitted to your saw. Quote
Robert Morse Posted January 12, 2015 Report Posted January 12, 2015 Let me know if you decide to do this, Mzdadoc... I've been pondering the same with the above table dust collection and wondering what to do... Another $400 - $500 for the Excalibur (?) or similar isn't very appealing right now. Quote
wouldwurker Posted January 12, 2015 Report Posted January 12, 2015 I've never had a 'dust in my face' issue with this saw and I very rarely use my blade guard. Assuming you're using a full size 4" dust collector? Do you have a separate air filter above as well? Edit; if anything, is the closed top blade guard with an opening in front creating a path to your face maybe? Quote
dwacker Posted January 12, 2015 Report Posted January 12, 2015 Powermatic did not do a great job with dust collection on the PM2000. They use a smaller hose on the inside of the saw to the dust chute. So essentially they took what was best case 450 cfm and knocked it down. It does work better than other saws that don't have the chute but is still flawed. Quote
Raefco Posted January 12, 2015 Report Posted January 12, 2015 I'm wondering if maybe there is a blade, setup or process issue, since the blade is cutting on its way down through the stock it seems it should shed long before it finds its way back through the material to be launched back at you. is it possible the back side of the blade is excessively rubbing the stock on exit. Quote
wouldwurker Posted January 12, 2015 Report Posted January 12, 2015 Powermatic did not do a great job with dust collection on the PM2000. They use a smaller hose on the inside of the saw to the dust chute. So essentially they took what was best case 450 cfm and knocked it down. It does work better than other saws that don't have the chute but is still flawed. Regarding the hose, just from a trouble shooting perspective, your hose inside the body is connected right? Mine will come disconnected every so often and blow a ton of dust forward off the blade. Quote
dwacker Posted January 12, 2015 Report Posted January 12, 2015 Regarding the hose, just from a trouble shooting perspective, your hose inside the body is connected right? Mine will come disconnected every so often and blow a ton of dust forward off the blade. Super glue. Happened to me once, never again. 1 Quote
Mzdadoc Posted January 12, 2015 Author Report Posted January 12, 2015 Update my smaller hose got completely clogged with a thin long strip that made it down there. At the top of the blade guard there is a 6" approx long clear plexi that is only held on with two screws. I'm just wondering if I could make a reverse funnel and attach smaller vac to it just to gather up more dust. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.