rubus Posted February 14, 2015 Report Posted February 14, 2015 Hi folks, just looking to purchase a dust collector and was considering the following units. I want to spend about $1000. The Powermatic PM 1300 canister Laguna 1.5 Hp cyclone Dust FX 2HP canister with Hepa filter. These are all in the price range but hard to nail down which one to purchase. I only run one machine at a time and will use flex 4" pipe. Thanks for any input.... Shane Quote
wtnhighlander Posted February 14, 2015 Report Posted February 14, 2015 For single tool at a time use, this one is quite popular, and saves you some money for lumber:http://m.harborfreight.com/2-hp-industrial-5-micron-dust-collector-97869.html Quote
tim0625 Posted February 14, 2015 Report Posted February 14, 2015 In my 21x27 shop, I have a Grizzly 1HP DC. It's the same style that Highlander recommended and its on 4" pvc lines and I only run one tool at the time. It WORKS.....but it's a little light.....I'm thinking something at least 2 HP would be better and 3HP would be the ticket. Maybe the PM 1300 would be the cat's meow at 1.75HP but I think you'd need to locate it in the center of the shop and change it from tool to tool. Mine stays at the back of the shop. Maybe someone here has one. Give it a few days and maybe someone will weigh in. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.