yonygg Posted November 24, 2010 Report Posted November 24, 2010 Hello again, As I have posted in the past, I'm renovating all the tools in my workshop. Other than replacement parts, they all need HEAVY calibration. So I'm considering buying a calibration instrument, preferably one that "Does it all" (calibrate all the powertools) rather than a different calibration instrument for each powertool. But it also need to to a good job except for being a "Does it all" instrument. So the ones that I could find are: 1. In-Line Industries A-Line-It Deluxe (here: http://www.in-linein.../a-line-it.html) 2. Oneway Multi Gauge (Here: http://www.woodcraft...ulti-Gauge.aspx) I read some reviews on the Oneway Multi Gauge at the past but as far as I remember it doesn't do all, But I couldn't find any review about the A-Line-It Deluxe instrument. I would love to hear any comments/ notes/ recommendations/ reviews that you have about these two instruments, and also if you know of other instruments that are up to the job. Cheers! Yonathan Quote
jab73180 Posted November 24, 2010 Report Posted November 24, 2010 I bought a cheapy dial indicator and amagnetic base on amazon and I built a couple jigs to do what I needed. I need to take pics and post them. Quote
Beechwood Chip Posted November 24, 2010 Report Posted November 24, 2010 Marc has a video on this: 118 – Jointer Setup Quote
nateswoodworks Posted November 25, 2010 Report Posted November 25, 2010 I did the same as Jason (mine is from Grizzly but ya know) The positive of this is you can build a jig to work perfectly for what you need it for, some rare earth magnets and scrap wood goes a long way. I bought mine with the magnetic base but to be honest I don't use it much. Nate Quote
Mister Pants Posted November 25, 2010 Report Posted November 25, 2010 I have the A-Line basic (or whatever the non-deluxe version is, same basic setup with the dial and blocks, but doesn't have the extra frills). It works great, it's machined well and sets up easily. I expect the extra frills on the deluxe would be similar in quality. Quote
Morton Posted November 25, 2010 Report Posted November 25, 2010 I have the Oneway Multi Gauge and use it on the jointer, planar (setting knives) and tablesaw (blade height). I don't think it does much more than that though. Things like setting the TS fence parallel to the miter slot for instance. The A-Line-It will be better for that. I don't have one, but my understanding is that it does pretty much everything (tuning up), but needs some setup for each procedure. Whereas the Oneway has no setup, it just is a reference edge and gauge. I also own and use the Saw Gauge. It's really great, but again pretty much a one-trick pony (not what you're looking for I think). Quote
Mister Pants Posted November 25, 2010 Report Posted November 25, 2010 Yeah the A-line does need a bit of setup, it doesn't take that long though and it was really handy squaring my fence to the miter slot. Quote
flairwoodworks Posted November 30, 2010 Report Posted November 30, 2010 I just use a 36" steel straight edge, a set of feeler gauges, and a dial indicator with a magnetic/articulating base for all my machine set up. A couple small clamps, screws, and bits of wood help to position the indictor the right way. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.