Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Shop getting close to finished...

Featured Replies

So my basement shop is getting close to done...i have a variety of tools  and the electrical is all run (4 sets of 115v 20amp and 230v 15amps next to each other on that wall with the door), but the wall dividing my basement (part of the full gutting) is framed without sheetrock.  My shop is a mess right now with the renovations so I'm not sending pics yet but hope to get it pretty close to wrapped up after Christmas.

That said, here is a (very) rough outline of the shop right now.  The only things not in place are the to-be-built roubo (will take the place of saw horses where the miter stand currently is and find its way under the lumber rack when i actually set it up).  Also, thinking of moving the drill press z(just got it in the shop) next to the jointer and i should have enough clearance to joint longer boards if i lower the drill press table.  I roll the planer out to the corner of my outfeed table to plane and that works ok so far.  The new band saw is still in the box in the garage until my neighbor comes to help me.

I've built a shaker side table and coffee table so far, as well as smaller stuff and the setup seems to work well.  All the tools except the table saw are on wheels.

Question for you all...anything i'm missing?  The flow has been ok as a small shop can be in my opinion but wont know until i finally get everything kind of organized so wanted to see if anyone had any suggestions.  Thanks!

 

workshop_layout2.thumb.PNG.559b3b3fcaf69workshop_layout.thumb.PNG.29d96908c4cf7b

(the triangle jut out is the area under the basement stairs)

aw c'mon, Ted, we need real photos!

there's a big traffic jam in the lower left corner of the shop - you can probably shift the jointer a bit towards the door - the material handling "lane" of the jointer can go across the door space.

I like the spot where material comes in to the lumber rack and the miter saw...  workbench looks well placed.  I assume planer/bandsaw are on wheels?

is the dust collector rolling to pair up with whatever tool you're using?  Can you make sure the DC and the tool are on different circuits?

It's hard to give advice on those computer layouts.  What makes sense in cyber world rarely makes sense in reality.  I guarantee that won't be your final layout...you'll move things around a dozen times until it looks nothing like your diagram.  Do a couple projects and you'll discover the glitches soon enough.

The one thing jumps out at me right away though is that you'll wanna move your bench away from the wall if at all possible.  It's best to have clearance on all four sides.  I know this is hard for people with organizational brains (this includes me) whose instinct is to maximize SPACE instead of workflow efficiency.  Shoving it against a wall seems natural.  But you'll find yourself wanting to work on all sides of the bench all the time, the least used being the tail vise end...but you still need clearance over there.  I use the opposite end all the time for this or that, front obviously, and occasionally the back.

  • Author

aw c'mon, Ted, we need real photos!

there's a big traffic jam in the lower left corner of the shop - you can probably shift the jointer a bit towards the door - the material handling "lane" of the jointer can go across the door space.

I like the spot where material comes in to the lumber rack and the miter saw...  workbench looks well placed.  I assume planer/bandsaw are on wheels?

is the dust collector rolling to pair up with whatever tool you're using?  Can you make sure the DC and the tool are on different circuits?

Real photos soon...its just too much of a disaster right now lol

Agree i can move the jointer, but to your point the dust collector is rolled to each tool, and where it is now is just close enough for the tube to reach...i'm contemplating fixed dust system soon, so that would alleviate the problem.

Planer/bandsaw/jointer are on wheels.

Dust collector is on a seperate dedicated 220v 20amp circuit.

It's hard to give advice on those computer layouts.  What makes sense in cyber world rarely makes sense in reality.  I guarantee that won't be your final layout...you'll move things around a dozen times until it looks nothing like your diagram.  Do a couple projects and you'll discover the glitches soon enough.

The one thing jumps out at me right away though is that you'll wanna move your bench away from the wall if at all possible.  It's best to have clearance on all four sides.  I know this is hard for people with organizational brains (this includes me) whose instinct is to maximize SPACE instead of workflow efficiency.  Shoving it against a wall seems natural.  But you'll find yourself wanting to work on all sides of the bench all the time, the least used being the tail vise end...but you still need clearance over there.  I use the opposite end all the time for this or that, front obviously, and occasionally the back.

I've used this setup (minus the drill press and band saw) for a couple projects and it's worked pretty well.  the outfeed table currently serves as my assembly and work bench area as well...and definitely proved the point i need an actual workbench, hence the future roubo.

Good point on the bench spacing...I was considering making the door swing out into the other room and will likely make this change which will allow the bench to be moved closer to the doorway.

 

Thanks for the advice...once i get it cleaned up over the Christmas break I will snap some pictures.  I hope to build a tool cabinet for my growing hand tool collection then and that should also help with the clutter.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.