TerryMcK Posted January 8, 2016 Report Posted January 8, 2016 Late last year I bought very cheaply a bunch of ancient but still working moulding planes from a UK website called Preloved.co.uk - essentially a similar site to Craigslist (which also exists in the UK). When they came, in a huge cardboard box, I had a look through them and found 21 planes of all different shapes and sizes. I bought these as a curiosity as I normally use a router and suitable cutters to produce shapes on wood. However as I looked into these more I found I could use them in my workflow to supplement any powered moulding. Then came the problem how the heck do I sharpen these as they are nothing like a regular plane? Our old friend and master woodworker Paul Sellers came to the rescue with a video he had already made showing how to sharpen these. So all I have to do is put a few hours aside to go through them all. No need to put them on a shelf to collect more dust (they probably hadn't been used since the 1950s) - I intend to use these. Here is Paul's video if you too have some old unloved moulding planes languishing in the bottom of a drawer in your shop. 1 Quote
James Wright Posted January 8, 2016 Report Posted January 8, 2016 I love the look of hand made molding. it just has a caricter that you can not get with a router. even if you use a router and then add a little bit with a molding plane it adds so much! Quote
Tom King Posted January 8, 2016 Report Posted January 8, 2016 I didn't watch the video, but for some round shapes, I use drill bit shanks, and DIamond Lapping Film. Having a set of number bits helps to find the right radius. I don't like using a piece of wood you cut with the plane, and then adding paper on top of that. The diameter ends up too large. A wee bit too small works just fine, but I don't want to make the profiles any bigger. Also, there needs to be some clearance relief, so just going straight in the direction of the cut won't give you any. Hollows and rounds can help make sharpening profiles for oddball shapes. I use Boxwood for those. Fortunately, the steel in every molding plane iron I have is pretty soft, so sharpening goes really fast. I lap the backs on Diamond Lapping Film on a granite surface plate, and it polishes the metal to a bright shine. I stopped buying molding planes from anywhere but the UK. It seems like they took better care of them over there. Here is seems like most ended up in barns with rusty irons. I wouldn't buy one with any pitting on the iron. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.