Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

My first (finished) cutting board

Featured Replies

Here's the story. A while back I was looking for an inexpensive end-grain cutting board (yeah, right). After getting discouraged with the selection I found on the internet I decided to look up directions on making one myself. In my research, I came across this site and new that I had found my new woodworking home (not that I had an old woodworking home, but I digress). I watched the videos and read through the process. I decided I could do that myself. Then I thought "self, you never do anything the easy way, so why should you start now?" I then did some more research and came across a design I liked a little more than Marc's. A little thought was all it took to decipher how the creator of that design did it. I then modified it to make it even more intricate (did I say that I never do anything the easy way?). I settled on the design and ordered the wood. I had to borrow my father in law's shed to do most of the work and, in the end, that board didn't get finished because I messed up one of the strips and when I flipped it over it didn't line up right. It's glued together, and I'll route the edges and add the finish some day, but that's a different story. For my next attempt I decided to go back to Marc's design, but again, I can't really do anything the easy way, so I made a minor modification to it too. I finished it using General finishes salad bowl finish mixed 50/50 with mineral spirits. My wife and roommate thought I had lost my mind because I kept going over and adding another coat of finish to it. Then, when it was finally completed, they decided that maybe I hadn't lost my mind because it looked really nice. I also added some really small little clear plastic feet to the bottom to raise it up off the counter just a touch. It turned out really well (I think) and my dad was very pleased to receive it as a Christmas present (along with some flavored oils).

Final dimensions: 10.5 x 10.5 x 2

I rounded all of the edges and corners with a ROS because I found it easier to deal with than the router.

Here's the pictures I took of it on his counter:

post-2022-0-97260000-1294266335_thumb.jp

post-2022-0-51706900-1294266306_thumb.jp

  • 3 weeks later...

I really like it, The maple and walnut is probably my favorite wood combo for cutting boards. The pattern that was created is also very interesting. Great job, without a doubt better than store bought!

  • 4 weeks later...

I think it looks great! I'm doing final sanding on a board with a similar design, so of course, I love it.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.