Recommended Posts

Posted

So I bought a table saw not really paying much attention to the fence or rails. Seemed adequate enough. Figured I'd spruce it up or replace it. What I failed to do was pay attention to how the rails mount to the saw, or any saw for that matter. 

So I picked up a new biesemeyer fence from Craigslist and thought "ok now for rails". Seems simple enough, but not as simple as it should be. If you don't know they chose to mount the rails to the underside of the table. 

I don't know if anyone makes rails for this configuration but I hadn't planned to buy new anyways. But finding used rails is out of the question. I've come up with a solution (not that it was a terribly complex problem) that should leave me with some nice factory looking rails.

I wanted to avoid welding two angles together or drilling and tapping a ton of holes. I took a trip to the bargain barn at the steel place and grabbed what I needed (1$ per #). By using a 3x3 tube and 2x3 angle it gives me extra material to use bolts and spacers. As an added benefit it shouldn't collect saw dust like the old rail. I'll post pics as the fence comes together this weekend.  Once I'm done I'll be sprucing up the extension and the out feed table. Everything was put together so quickly when I bought my house I didn't have time to get fancy.

 

IMG_1554.JPG

IMG_1559.JPG

IMG_1557.JPG

IMG_1560.JPG

IMG_1561.JPG

IMG_1562.JPG

  • Like 1
Posted

Very nice. If you haven't already, I'd go check out the very super cool tools build video series on making the bies rails. 

You seem to be on the right track but there is some good info to be found there.

Posted

The craziest thing is that was the exact length of that 3x3 tube in the bargain section. The angle I had to have cut. I should have just bought new stuff instead of cleaning up rust. Up next is paint and two end caps2ab9c05bc79d326b82e14a8aa965ad3d.jpg

 

 

Sent from my iPhone using Tapatalk

  • Like 1
  • 3 weeks later...
Posted

Things have been moving along

 

 

Sent from my iPhone using Tapatalk

473bd550c504762945a44696428cf0fa.jpg5da9b5aabba0d8310857b3832e2fb770.jpg8b083fc49d2195645793fbfab238278b.jpg46fc083601829fe95cf13285f5efcf94.jpgc00e5f70ca793e98874f09ace443ba66.jpgd63d1718cbe3a56635c5f37b2c8500d5.jpg

 

New extension table, double poplar. Also flipped the run off table and capped it with 3/4 poplar. Have a good ideas for the rockler router fence.

 

 

Sent from my iPhone using Tapatalk

  • Like 1
Posted

Definitely need to clean up around the saw as well lol. Sorta tossed a bunch of copper behind it in case I needed it elsewhere on the house. Also a couple of pieces that are waiting for rehab, Sheetrock pieces. It's all time to go now that most everything is done

 

 

Sent from my iPhone using Tapatalk

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 62 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined