Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

New Amateur Tools - Need Advises

Featured Replies

I want to start wood working and make some garden fences, gate, closet shelves, arbors and some garage shelves.  I have a small work area and wonder if anyone could help with tools suggestion.  I have small storage area in the garage left and the work space may be a one car parking size which I might have to roll off the tools to the corner.  I would like to get a table saw (DEWALT DWE7491RS) possibly miter aw (GCM12GDL) with stand? (T4B), a decent joiner, clampssss.

If I could "do it all over again" I would buy a nice quality table saw and skip 90% or what a home center (Home Depot / Lowes) offers. Grizzly, Powermatic, and SawStop all make really nice table saws. Craigslist can be a gold mine for used equipment, if you want to go the used route. I think the Delta and Craftsman table saws are pretty common to see there. However, since space is a premium you may have to opt for a smaller contractor saw, rather than a full-blown cabinet saw.

For the projects you listed, it sounds like a good sliding compound miter saw would be towards the higher of your priorities. I can't say I have much experience in that department, my non-sliding miter saw is just a cheap Ryobi. I have heard good things about the Bosch miter saws.

Hi husadee! Welcome to the forum. As always, you're going to get a variety of answers to a question like this.

Those are some top-grade tools, which aren't strictly necessary for the project you have laid out. That Bosch in particular is a nice saw, but overkill for exterior work and shelving. Fundamentally there are two approaches to getting into woodworking: Either buy your last tool first, or slowly upgrade what you have as time/finances/projects allow. I'm firmly in the upgrade camp. I'm stateside, but i assume you should be able to find a solid miter or chop saw used for half the price of the Bosch, probably including the stand. Just guessing by the model number of Bosch you posted that you're in the UK. Do you have a local version of online classifieds?

Jointers are one of those things where you really aren't served by going cheap. It's also not necessary for your initial list of projects. Arbors and utility shelves don't really require a jointer. Best wait for a good deal on something good, or until you have a project that requires it.

Update: A mobile/jobsite saw is good if you don't have an enclosed shop space, but if you do have an enclosed garage, I definitely recommend stepping up to something better. A used hybrid saw if you can't spare the change, or a cabinet saw if you can. There are aftermarket rolling stands available for most any tool that doesn't come with one.

  • Author

I have a cheap Ryobi miter that I can use for less precise fence, gate and arbor projects so the Bosch miter is really on Christmas wish list.  I have been watching safety and project videos and just wondering whether I could get away without joiner for a good walk in closet and other interior wall shelving projects or not.

I am stateside as well.  I got miter saw from a project last year and plunger router (no table) from the last project, I have been following kind of 1 new tool for new project a bit.  I don't believe that I could justify paying for high end power tools since it will be mostly hobby and weekend projects.  But I also don't want to go too cheap since it could effect safety and some quality (I think), and no permanent space to put any tool really.

Craigslist can be a gold mine for used equipment, if you want to go the used route. I think the Delta and Craftsman table saws are pretty common to see there. However, since space is a premium you may have to opt for a smaller contractor saw, rather than a full-blown cabinet saw.

 

I definitely agree that Craigslist or EBay are great options. I use an app called OfferUp that is very similar and set up on a local to you area.

 

I would say be careful buying a Craftsman saw though. I have owned 3 or 4 over the years and they work great for the price. However my table saw guides are undersized in comparison to the standard slots all the other saws have. Meaning that if you want to use an aftermarket miter gauge like the Incra or Kreg it will not fit the guides. Good luck in your search and welcome the forum.

 

Sent from my SM-G930V using Tapatalk

 

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.