455NYSE Posted May 7, 2017 Report Posted May 7, 2017 Has anyone heard or come across a Grizzly 8" jointer model # G059 with a spiral head? One has appeared on Craigslist and I haven't been able to find any information on this model. Quote
Eric. Posted May 7, 2017 Report Posted May 7, 2017 Probably a typo, there's no such model. At least not currently. Most likely it's a G0490. http://www.grizzly.com/products/8-Jointer-with-Parallelogram-Beds-and-Spiral-Cutterhead/G0490X @Cliff can give you an experienced opinion. There are tons of these out there. You'll get a spectrum of opinions between "works for me" and "pile of garbage." 1 Quote
455NYSE Posted May 7, 2017 Author Report Posted May 7, 2017 You are correct on the typo. It's actually a G0593. Thanks anyway. Quote
Eric. Posted May 7, 2017 Report Posted May 7, 2017 I'm pretty sure that's a discontinued model that was replaced with the G0656 (or G0656X if it has a spiral head). I don't know what the minor differences are between the old and new models, but after a quick glance, the one you're looking at has dovetailed ways. That doesn't make the jointer unworthy for consideration but it's very little additional cost to upgrade to a parallelogram model, which is WAY more convenient when it comes time to calibrate (and you need every convenience you can get when it comes to calibrating a Grizzly jointer...you'll have to trust me on that). If I had to choose between a spiral head and parallelogram, I'd go with the latter. Ideally you get both but if you're in the used market then you can't be as picky. How much are they asking for it? 1 Quote
Cliff Posted May 8, 2017 Report Posted May 8, 2017 5 hours ago, Eric. said: Probably a typo, there's no such model. At least not currently. Most likely it's a G0490. http://www.grizzly.com/products/8-Jointer-with-Parallelogram-Beds-and-Spiral-Cutterhead/G0490X @Cliff can give you an experienced opinion. There are tons of these out there. You'll get a spectrum of opinions between "works for me" and "pile of garbage." 1 Quote
DocRico Posted May 9, 2017 Report Posted May 9, 2017 I came across the same ad in Canarsie. They are asking for 1k for the jointer (that has a spiral head) and a g0453 planer. Seems reasonable to me. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.