Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

What is a durable but natural looking finish for a Walnut dining table?

Featured Replies

Hi folks,

I know this kind of question has been asked a thousand times, but I have to ask because my head is awash with different opinions from trawling the internet looking for the right wood finish.

I am making a Walnut dining table, and when I come to finish it, I need a finish that is two things...
1. Durable: as it's a dining table, it will get wear and tear. Ideally I don't want to be in a situation where it needs to be refinished/repaired again and again.
2. Natural looking: that looks as if the timber is bare and unfinished (or as close to this as possible with commonly available products). I don't mind if the timber colour becomes a little richer, but I don't want the surface to have any kind of sheen, or apparent film layer.

My understanding is this...
Wax is not an option because of its durability - it's susceptible to wear and also moisture.
I've used water-based matt varnish in the past, but it leaves a plasticky look to the surface. I've read that thinning the varnish and applying just a couple of thin coats will give a less plastic look - any thoughts on this?

So, I'd appreciate suggestions about what products would achieve this type of finish - please let me know what kind of experience you've had with what you're suggesting!

Many thanks,

Andy.

detail.jpg?c=1480706987

 

 

I think it's cool that the third image that pops up when you gargle "arm r seal satin" is my coffee table. :D

detail.jpg?c=1480706987

Beat me too it ! Haha. Good trigger finger buddy

 

Sent from my SM-N910W8 using Tapatalk

 

 

I'll add this though...you say you don't want the finish to appear as if it has any film or sheen, yet you want a durable finish...that does not exist in reality.  The product I posted is as close as you'll get to a natural look with protection, but there's going to be compromise somewhere.

  • Author

Hi Eric and Shaneymack, thanks for your quick replies!

Can you tell me a little about your experiences with this product... how the timber looks, how it stands up to wear and tear, etc.?

Thanks!

Andy-C

  • Author
3 minutes ago, Eric. said:

I'll add this though...you say you don't want the finish to appear as if it has any film or sheen, yet you want a durable finish...that does not exist in reality.  The product I posted is as close as you'll get to a natural look with protection, but there's going to be compromise somewhere.

Fair point, any thoughts on thinning the water based matt varnish and applying just a couple of thin coats?

Fair point, any thoughts on thinning the water based matt varnish and applying just a couple of thin coats?

 

If you want a nice look with no film just put a few coats of danish oil. Not a whole lot of protection but you don't want a film, so....

Danish oil looks amazing and will take a bazillion coats to see a film.

 

 

Sent from my SM-N910W8 using Tapatalk

 

 

I linked a couple of my walnut pieces that were finished with ARS.  See below.

I'm picky about a "natural finish" too.  But you have to adjust your expectations when durability is something you want...and with a dining table, it's something you want...especially since you said you don't want to refinish it constantly.

Finishing is always a compromise between appearance and durability.  Straight oils will look the most natural but offer zero protection - but easy to repair.  Oil/varnish mixes like Danish oil offer slightly more protection...but not by much, and are a royal PITA to apply because of the long dry times between coats.  I've also found the sheen from DO to be...inconsistent.  I'm not a fan of DO.

On the other end of the spectrum you have full strength poly that you brush on straight from the can, which builds a film very quickly and ultimately looks like your wood is encapsulated in plastic.  Durable as hell...and totally ugly.

The sweet spot between these extremes are wiping varnishes, which are simply diluted urethanes.  Because they are diluted, they don't build a film as quickly, which means you have more control over the appearance, but they do build some film, and therefore offer protection.  They also dry fairly quickly, so you can be done with finishing in three days or so.  Not nearly as fast as shellac or lacquer, but way faster than oil or DO.  It's the ideal compromise, IMO.

I know you want your cake and to eat it too, but you're hoping for a solution that does not exist.  A film-forming finish is a protective finish.  No film, no protection.

I think you'll find that the satin sheen does not take away from the natural look...to the contrary, it catches sunlight in just the right amount and breathes life into the wood, for want of a better description.  Do some test boards...I think you'll be happy with it.

 

 

 

There is such a thing, but it's a floor finish, and $130 a gallon.   But I'm not sure if how it works on Walnut.   I'll try some the next time I do a floor with it.  It's durable enough for people to walk on in hotel lobbies without scatching.   On Oak, it looks like nothing at all is on the wood.   It's an Acid Cure Urethane with not an extreme odor, but you don't want to breathe the stuff that it outgasses while curing.   There are two parts.  One part is a gallon, and the activator is in a small bottle.  It does darken Pine a little, but I have no idea yet about Walnut.  It's really easy to apply.  You just flood it on.

Bona Naturale

https://www.amazon.com/dp/B0083HXE8C/?tag=googhydr-20&hvadid=181988075039&hvpos=1t3&hvnetw=g&hvrand=5391762817324436773&hvpone=&hvptwo=&hvqmt=b&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9009899&hvtargid=kwd-123622015524&ref=pd_sl_8g2q66cqwq_b_p20

  • Author

Thanks Eric, that's really helpful. I know that the perfect solution doesn't exist, but hearing your experiences of the various finishes is pretty useful to me. I'll go looking for a wipe-on varnish - I live in Ireland so I can't get the brand that you suggested, but I'm sure there's some local equivalent.

 

Hi Tom, the Bona Naturale looks pretty interesting... have you used it much? Also, you mentioned that it on Oak, it looks like there's nothing on the wood - so is it noticeably different looking to how a matt varnish looks on Oak?

 

Thanks,

Andy.

32 minutes ago, Tom King said:

Bona Naturale

I have no experience with their finishes, but if they work as well as the floor cleaning solution from the same company...I'd pass.  It's garbage.  Probably not fair to judge one product based on another, but it's such a terrible cleaner it gives me pause.  Horrible streaky mess.

I have no experience with their floor cleaning stuff, but have used their commercial floor finishes for years.  It's good stuff.  I do remember seeing that the floor cleaner has silicone in it, and if you ever use it that you have to sand down to bare wood to refinish, so I've stayed away from it.

Andy, to answer your question, yes, it's significantly different on Oak than anything else.  If you look really close, like with your face a foot away from the surface, you can see that there is something on the surface, but it doesn't change the appearance of Oak at all from an arms length away.   Probably a factor of a hundred different than any matt varnish.

Another good thing about the Naturale is that you can use it as a bonding coat on top of some other floor finishes years later, and then be coated with something else.  I've used it like that a few times too, but you can't do that if you have ever used a silicone on the floor surface.

  • Author

Good stuff... I'm leaning towards the wipe-on polyurethane at this stage. I like the sound of the Bona Naturale, but unfortunately the price is putting me off...

Do any of you guys have any experience of Osmo products? http://www.osmona.com/interior.shtml

 

Andy.

I had a look at some Osmo tins the other day which had been applied to a tabletop. It looked and felt similar to a rubbed in oil/varnish blend - I havent tried it but will when the right project calls for it. Expensive though - $45 for 375ml.

Peter Parfitt has done a few videos

 

 

 

 

 

Sent from my SM-N910W8 using Tapatalk

 

 

Does the ARM-R-SEAL have an amber color?

 

From the general finishes site:

 

"Features

 

Color tone: Warm amber tone. This finish will continue to darken over time.

 

Water or Oil: Oil Based Ambering: Yes "

 

 

Sent from my SM-N910W8 using Tapatalk

 

 

  • 3 weeks later...

I'm late to the party but I just finished a walnut top desk and used Arm R Seal on it. This is 7 coats of ARS Satin applied by hand with a rag. Sanded (lightly) the first coat with 320 and then each subsequent coat was rubbed with #0000 steel wool. Incredibly happy with this finish overall in preserving the texture of the surface grain while also providing some decent protection. 

de6313f124d612e83f1d83f094a0447a.thumb.jpg.ef61d362e7e4b02cc1483b5850647aa1.jpg7859563fb6d12a79ddd8205db3ad55c4.thumb.jpg.63bd0d21688b72a460100f0382afad6e.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.