SandyL Posted August 14, 2017 Report Posted August 14, 2017 Hi: This is my first post to any blog... ever. I found a thick piece of wood in the salt water by an uninhabited island in Buzzards Bay. 18' X12" X 6". It is very heavy and had lots of barnacles. I'v'e cleaned off the barnacles and Im letting it dry in the sun. 5 of the 6 sides are smooth. One edge has some "rot", but is not punky..quite hard and seems stable. My plan is to dry it up and then apply mineral oil or wax. My question is what can I make with this, while preserving the slab ( dont wan to cut into it.). I was thinking a cheese board but it is too heavy to be practical for that use ...Im guessing 50 lbs. It may lighten up some when I dry it out. Any advise on treating the surface and idea for what to make with it given dimensions is appreciated. Thanks Quote
Jean [Fr] Posted August 14, 2017 Report Posted August 14, 2017 Welcome SandyL, Well a picture would be more talking. A piece of wood with a story makes often special pieces. There's a lot of things you can do with that kind of slab : lamp foot, end table, night stand, stool... Doodle ideas on paper, find the right proportions if you add a lampshade or some feet. Imagination and design are the key of success. Take your time. You should allow it to dry slowly because a fast dry can cause some cracks. You will probably have to wait more than a year before to be able to work it safely. As you can see, you have plenty of time to think about it ! Have a good time with that wooden treasure ! Quote
Tom Crawford Posted August 14, 2017 Report Posted August 14, 2017 I may be wrong, but I'm not sure I would want the salt laden sawdust in - on my power tools. Others here probably have more experience than I, hopefully they will comment. Quote
wtnhighlander Posted August 14, 2017 Report Posted August 14, 2017 Surface treatment really depends on use. Fir a cutting board, mineral oil & beeswax is the way to go. But if you attach legs and make an end table from it, something more durable is in order, perhaps a wipe-on polyurathane,like Arm-R-Seal. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.