Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Clear finish over clear epoxy fills in clam wood

Featured Replies

I have found some related topics posted before in here but can't find the answer to my specific question.

I have some clam wood (fir: https://trinityrivermarine.com/information/) which has all these beautiful holes and I am using it to make a table top for a kitchen island.

I wanted to show off the holes using clear epoxy resin which I have already done with West Systems 105/206. The epoxy has cured beautifully and is perfectly clear...until I sand it. Now I have sanded the surface is scratched up and no longer clear. I know from messing around that more epoxy on top bring back the clarity but I can't afford to finish the whole piece with epoxy. I am looking for advice on how to finish the whole piece to get back the clear finish over the holes.

My plan was to sand from 80 - 220, then a satin varnish e.g. Arm-R-Seal Top coat (https://generalfinishes.com/retail-products/oil-based-top-coats/arm-r-seal-urethane-topcoat#.WhNCX0qnFYE) 2-3 coats, working up to 600. I fear that the varnish will amber. Does anyone have a recommendation for a finish and keep in minds its kitchen table use.

I can do this on a test piece but I hoped for some advice before I buy anything and save me some trial and error.

3 hours ago, pnwtransplant said:

I have found some related topics posted before in here but can't find the answer to my specific question.

I have some clam wood (fir: https://trinityrivermarine.com/information/) which has all these beautiful holes and I am using it to make a table top for a kitchen island.

I wanted to show off the holes using clear epoxy resin which I have already done with West Systems 105/206. The epoxy has cured beautifully and is perfectly clear...until I sand it. Now I have sanded the surface is scratched up and no longer clear. I know from messing around that more epoxy on top bring back the clarity but I can't afford to finish the whole piece with epoxy. I am looking for advice on how to finish the whole piece to get back the clear finish over the holes.

My plan was to sand from 80 - 220, then a satin varnish e.g. Arm-R-Seal Top coat (https://generalfinishes.com/retail-products/oil-based-top-coats/arm-r-seal-urethane-topcoat#.WhNCX0qnFYE) 2-3 coats, working up to 600. I fear that the varnish will amber. Does anyone have a recommendation for a finish and keep in minds its kitchen table use.

I can do this on a test piece but I hoped for some advice before I buy anything and save me some trial and error.

Yes a poly top coat will fill in the scratches from the sanding and make it look clear again. I used to use hardwood floor poly as a "screen protector" on my old LG choclate 2 phone when the screen got scratched so bad i couldn't read it any longer.

I agree with your plan and have used both to accomplish what you want. However, I used the combo on a coffee table and not a kitchen island so I don’t know how ARS will hold up under those conditions. Maybe others can chime in about the durability. That is some fantastic looking wood. Please post pics after or even during the build. By the way, welcome to the forum. 

  • Author

Thanks for the comments, seems like it will be alright. Really appreciate your advice.

I will be back to post pics at some point including some process pics.

You can also keep sanding it with higher and higher grit. You may need to take it up to a 1000 grit (or more) using wet sandpaper to remove all the scratches but they should come out. Don't skip any of the grits and work you way up slowly and lightly.

  • Author
3 hours ago, thatCharlieDude said:

You can also keep sanding it with higher and higher grit. You may need to take it up to a 1000 grit (or more) using wet sandpaper to remove all the scratches but they should come out. Don't skip any of the grits and work you way up slowly and lightly.

Yes, good point. The wood wouldn't benefit from this treatment but it would get the epoxy in better shape for the finish.

16 minutes ago, pnwtransplant said:

Yes, good point. The wood wouldn't benefit from this treatment but it would get the epoxy in better shape for the finish.

You'd have to wet sand and the nearby wood would cause more trouble clogging your high grit paper and introducing water/oil and sanded epoxy into unfinished wood. Just sand to 180 or 220 and poly it will come out clear.

The circled red knot was filled with west systems 105/207 wood was sanded to 180 and covered with a wiping poly. The epoxy started out hazy and after the fist bit of finish there was zero haze. It's perfectly clear as if it was never sanded.

5a0111ee82f56_BirchCoffeeTable011Share.jpg.654ded623cd1300cd7ae761b5ba185bc2.thumb.jpg.29186a8bde38bcbc1e47ee710d11e8d8.jpg

The knot looks dark but that's just lighting the center portion is coverd in a good layer  of epoxy. I wish i had a high res version of this picture but this is what i have.

More examples

22289903_10101565801443489_8928374787269952661_o.thumb.jpg.d7d32d538f1dab4395d53a6bfc336ef2.jpg

22281729_10101565800410559_1711888166488525701_n.thumb.jpg.0dfd7e31ad12800632da2c112d7810c6.jpg

Edited by Chestnut
More examples

  • Author
5 minutes ago, Chestnut said:

covered with a wiping poly.

Do you remember exactly which poly? 

Thanks for the example of this working exactly how I want it to.

I've used, ARS, minwax wipe on, warter born brushing poly, brushing lacquer. Honestly any curing type clear is going to do the same thing as well as shellac.

  • Author
1 minute ago, Chestnut said:

I've used, ARS, minwax wipe on, warter born brushing poly, brushing lacquer. Honestly any curing type clear is going to do the same thing as well as shellac.

Great, thanks.

4 minutes ago, pnwtransplant said:

Great, thanks.

Think of it in terms of sanding between coats. You create little scratch lines that disappear when you add the next layer.  It's also the same thing that is happening to the wood except wood ins't clear.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.