derekcohen Posted May 25, 2019 Report Share Posted May 25, 2019 While working on the current build (I will post this later), I took a couple of minutes to make a very short video using a Knew Concepts fretsaw to remove the waste from pins. The purpose is to demonstrate how to efficient this process is, as compared with chopping the waste out. Note that the wood is 20mm thick Hard Maple (it is indeed very hard wood!). These are mitred through dovetails for the carcase of a side table with drawers. https://www.youtube.com/watch?v=M6O4rY_0zQs&feature=youtu.beRegards from PerthDerek 1 Quote Link to comment Share on other sites More sharing options...
pkinneb Posted May 25, 2019 Report Share Posted May 25, 2019 This is how I do it as well. I did add a large diameter handle to my Knew Concepts fret saw that fits my hand better. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.