Bobtro11 Posted September 20, 2019 Report Share Posted September 20, 2019 Ok so I have a black and Decker table saw firestorm is the brand and after replaced the saw blade I plugged it back in and it was on. So I went to turn it off and it’s in the off position. Switch quit working. Immediately unplugged it. Pushed reset only won’t reset. Saw is stuck on! Any ideas on how to fix this? Checked online and found nothing! This happened one other time when I was cutting a lot of wood repeatedly but it fixed itself. Quote Link to comment Share on other sites More sharing options...
Mark J Posted September 20, 2019 Report Share Posted September 20, 2019 You've got this question posted twice, so I'll just echo here the other answers. The switch is obviosly bad, and your best bet is a replacement. That doesn't have to be OEM (though that would be the easiest). It could be any switch with a big red off paddle. It needs to be mounted where that paddle can be easily smacked. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.