benz240 Posted December 20, 2019 Report Posted December 20, 2019 Does anyone have personal experience with Oneida's new Supercell? I am strongly considering it, as I have a small 2 car garage workshop and just plan to run flexible hose to each tool as needed for dust collection. The unit seems to be a good compromise between high flow and high pressure. I currently use a shop vac with a Dust Deputy attached and it has been great but is too loud and doesn't have enough airflow for the bigger tools, so I definitely need to upgrade. Have also been considering the Mini Gorilla. Quote
blackoak Posted December 20, 2019 Report Posted December 20, 2019 Just had a look at it . It 's impressive for sure . Way out of my budget however . I've got my central DC , and 3 separate work stations w/ DC in them ( shop vac-dust deputy etc. ) But if I were starting from scratch , that system could replace alot of what I currently have . I like it. Quote
benz240 Posted December 20, 2019 Author Report Posted December 20, 2019 I'm really just getting started with my shop setup, and while that price is definitely a huge turn off, I'd rather buy once cry once. Oneida seems to have the best design for cyclones and from what I hear excellent support should I need any, so that's worth a bit of a premium. And my goal with DC in my shop is to replace the shop vac as well - it seems the Supercell having high flow would work with smaller tools like the ROS etc. as well as doing well for shop floor cleanup, and still do a decent job with the 4" dust port tools. Only other concern with the unit is the noise - with 3 smaller motors and impellers as opposed one bigger one, does it end up sounding more like a shop vac than a typical 3-5hp induction motor DC? That's where it would really help to hear from an actual user, if there are any. There are only about 4 reviews on Oneida's website, all positive... Quote
pkinneb Posted December 20, 2019 Report Posted December 20, 2019 57 minutes ago, benz240 said: I'm really just getting started with my shop setup, and while that price is definitely a huge turn off, I'd rather buy once cry once. Oneida seems to have the best design for cyclones and from what I hear excellent support should I need any, so that's worth a bit of a premium. And my goal with DC in my shop is to replace the shop vac as well - it seems the Supercell having high flow would work with smaller tools like the ROS etc. as well as doing well for shop floor cleanup, and still do a decent job with the 4" dust port tools. Only other concern with the unit is the noise - with 3 smaller motors and impellers as opposed one bigger one, does it end up sounding more like a shop vac than a typical 3-5hp induction motor DC? That's where it would really help to hear from an actual user, if there are any. There are only about 4 reviews on Oneida's website, all positive... I can't speak to this unit but I have been very happy with my Oneida 3HP Dust Gorilla for 14ish years now Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.