Alf Torp Posted March 13, 2011 Report Posted March 13, 2011 Hello everyone, My name is Alf and I recently decided to take up woodworking as a hobby. Partially because me and my girlfriend bought an old house a few months ago, but also because I "work" in IT. Though, as you probably can tell from the previous sentence, in my mind I consider it a job, but not really work When its time to go home I usually feel the need to actually do something constructive and creative, so I decided that using the house as an excuse to stock up on some power tools and start building stuff was a good idea. Fortunately my girlfriend fell for it too! Anyway, here in Norway its pine and fir country all the way. Its difficult to buy anything but pine, fir, white oak and the occasional ash. If you are lucky you can find a piece of teak but generally speaking dark woods are very difficult to come by and very pricey. At the moment I am trying to get organized in my basement, which is about 4x5 meters (215 sq.ft) in size. The house was built in the 1920`s, so there is a lot to be done to it. However, getting a workshop area set up is kind of essential to progress in the rest of the house, so thats where I figured it was best to start. So far I`ve built my work bench, with a twin screw Veritas vise, I got my bench dogs and wonder dogs from them yesterday so its pretty much complete. I built it from construction grade lumber, 2x4" and 1 1/2x3" glued up for the top, which I then laid down a 15mm (9/16"?) sheet of plywood on top of as a replaceable work surface. I also built in a lowered platform for my table saw (Makita 2304) to sit on, so the top is flush with the top of the work bench, making it a combined support table/workbench. Its not the best solution I guess but the only one that would allow the table saw to be indoors.The jaws for the vise I made from ash. Having no idea how it will behave, I guess I will just have to see what happens with time... so far its working good though. I`ve also built a drawer section that sits in the base of the work bench, as well as a drawer cabinet for storage. In addition I`ve just completed a table stand with drawers for my drill press to stand on. I will see if I can post some pictures of these things eventually, but.... be gentle, I`m just getting started So thats that for now, I hope I can draw on the expertise in here to begin with as I am learning from scratch as I go. Maybe in a few years, I will be able to contribute something back Cheers, Alf Quote
Alf Torp Posted March 13, 2011 Author Report Posted March 13, 2011 Decided to show some pictures of the drill press stand to begin with. Its made from pine plywood, with ash trim. Unfinished, while glueing on the ash edge on the top: Here, its received its varnish (but not its rear "legs"...): The drawer rails, capable of supporting up to 40 kilos... Thats about 80 lbs if I remember correctly. And here in its intended use: Quote
rmac Posted March 13, 2011 Report Posted March 13, 2011 Looks like you are off to a really good start! -- Russ Quote
Alf Torp Posted March 13, 2011 Author Report Posted March 13, 2011 Looks like you are off to a really good start! -- Russ Thanks Russ, My guess is that its beginners luck I probably spent about 16 hours on it, including the varnish. Cheers, Alf Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.