Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Anybody sharpen their planes with diamonds?

Featured Replies

I haven't used them yet. They call their's 8000 mesh (on DMT's web site), whatever that means. They say their grain size is 3 micro, that is more like a 4000 grit waterstone. Not sure if we are comparing apples to apples here. I would like to find out more about their stones.

Mike

Anyone try this?

DMT Dia-Sharp D8EE 8000 grit

Normally I only see diamond stone to about 800 or 1200 grit, but this looks interesting. Has anyone tried this yet?

http://www.bestsharpeningstones.com/dmt/dmt_dia_sharp_ee8000.html

I have recently started using diamond paste (bought for around $3 a syringe from the 'bay) I use waterstones for my O1 tools but the A2 irons with my modern tools sharpen much quicker on diamonds.

Lawrence

  • 8 months later...
  • Author

I wanted to update this post.

I've now gone to all diamonds all the time.

I've been sharpening with three grits of diamonds and I find that I much prefer this to waterstones.

They say you can use the diamond stones without any water but I found that spraying a light coating of soapy water on them with a spray bottle works like a charm.

I like the lack of mantainence required, as well as the way they don't cup or dish.

Am I the only one out there using diamond stones exclusively?

Does anyone know of a drawback to using diamonds exclusively?

I'm thinking of selling my water stones, since I haven't used them in a long time now. Basically I wanted to see if I was making a mistake and there may one day be a reason I'd miss my water stones.... I can't think of one... anyone have any ideas?

A coworker of mine has gone to diamonds too and I just ordered 600 and 1200 grit DMT DiaSharp Stones from Lee Valley (to go along with the Veritas Mk II hinign guide). I'll be trying these out as soon as they come in.

  • 1 month later...
I wanted to update this post. I've now gone to all diamonds all the time. I've been sharpening with three grits of diamonds and I find that I much prefer this to waterstones. They say you can use the diamond stones without any water but I found that spraying a light coating of soapy water on them with a spray bottle works like a charm. I like the lack of mantainence required, as well as the way they don't cup or dish. Am I the only one out there using diamond stones exclusively? Does anyone know of a drawback to using diamonds exclusively? I'm thinking of selling my water stones, since I haven't used them in a long time now. Basically I wanted to see if I was making a mistake and there may one day be a reason I'd miss my water stones.... I can't think of one... anyone have any ideas?
I use DMT 3X8 plates for all my flat sharpening needs.
  • 3 weeks later...

I use a 600/1200 DMT for all my primary sharpening but switch to waterstones for the finer grits not because they are any better but because I haven't worn mine out yet. I have burned through many diamond stones however. I get about two or three years out of one before I feel that they start to lose their bite. I feel they are well worth the extra expense and also work very well for sharpening things like plug cutters and countersinks.

Have a diamond stone. Mostly use it to flatten my waterstones, but I also use it occasionally to flatten the bottom of my handplanes. I use waterstones on the blades.

I use diamond stones as well but the finer ones are starting to loose there effectiveness. I was using strictly oilstones but bought a couple of these to speed up the process, I do feel it was a mistake. My personal opinion is I am not getting the return on my money that I would like. Latre this year I plan to get some new oil stones (a courser one than I have and replace the others I use because mine are too narrow) I talked with Schwarz a while back and he suggested going right to http://www.danswhetstone.com/bench_stones.htm . A bunch of the manufacturers get their stones right from there anyways. Just my opionion.

Nate

I came across a series of videos on youtube the other day about sharpening with diamonds. They're from www.askwoodman.com. He has over 300 videos on his channel. 48 of them are exclusively on his sharpening methods. He does go into EXTREME detail and he uses DMT duo stones exclusively.

I sharpen my plane, spokeshave, and chisels all on diamond stones with ending on a strop. I use the method Paul Sellers uses in his Artisan course and it works great. I use a convex bevel on all with no sharpening jig or guide. Fast and very effective.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.