Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

European Cabinet Hinge preparation

Featured Replies

I really need some advice from someone who installs these frequently. Here are my details...

  • Cabinets are frame-less euro style.
  • Hinges are full overlay.
  • Reveal necessary is +-1/16" on outside edges of door.
    Here is my confusion....

  1. On the cup drilling, how far in from the door side (Not top or bottom, the side where the hinges are being installed) do I make sure the cup hole is drilled?
  2. On the plate install in the cabinet, how far in does the plate have to be?

I have the spec sheet, but it is D$%# confusing to read. I attached it anyways to see if anyone can help out.

THANKS to anyone who can share some knowledge.

Salice Series 200.pdf

I really need some advice from someone who installs these frequently. Here are my details...

  • Cabinets are frame-less euro style.
  • Hinges are full overlay.
  • Reveal necessary is +-1/16" on outside edges of door.
    Here is my confusion....

  1. On the cup drilling, how far in from the door side (Not top or bottom, the side where the hinges are being installed) do I make sure the cup hole is drilled?
  2. On the plate install in the cabinet, how far in does the plate have to be?

I have the spec sheet, but it is D$%# confusing to read. I attached it anyways to see if anyone can help out.

THANKS to anyone who can share some knowledge.

Bobby Slack works exclusively in Euro cabs. Hopefully, he will see this post. If not, you can PM him. He'd be glad to help.

I really need some advice from someone who installs these frequently. Here are my details...

  • Cabinets are frame-less euro style.
  • Hinges are full overlay.
  • Reveal necessary is +-1/16" on outside edges of door.
    Here is my confusion....

  1. On the cup drilling, how far in from the door side (Not top or bottom, the side where the hinges are being installed) do I make sure the cup hole is drilled?
  2. On the plate install in the cabinet, how far in does the plate have to be?

I have the spec sheet, but it is D$%# confusing to read. I attached it anyways to see if anyone can help out.

THANKS to anyone who can share some knowledge.

The cool thing about Euro Hinges are, they are all pretty much standardized, so Blum, Salice, Grass, Mepla, etc, etc, etc, will all pretty much install the same way.

The 35mm (1 3/8") hinge bore center is located 7/8 inch from the edge of the door. Bore the hole about 1/2 inch deep as well.

As far as the plate mounting to the cabinet side, there are usually two screws which run vertically. The centerline of these two screws are located 37mm (Roughly 1 7/16) back from the front edge of the cabinet, and the height spacing of them should be 32mm on center.

By the way, I got this info from Kitchen Cabinets Made Simple ;)

Hope this helps

Gregory

Hey Rob,

I just finished a cabinet with euro hinges. (Posted in the critique room) They're a little different from the ones you are using, but you're right - the instructions were not real clear. I ended up using 2 scraps and making a mock-up - it took 2 tries until I got what I wanted. I kept the mock-up together and referred to it throughout the build. Good Luck!

  • Author

The cool thing about Euro Hinges are, they are all pretty much standardized, so Blum, Salice, Grass, Mepla, etc, etc, etc, will all pretty much install the same way.

The 35mm (1 3/8") hinge bore center is located 7/8 inch from the edge of the door. Bore the hole about 1/2 inch deep as well.

As far as the plate mounting to the cabinet side, there are usually two screws which run vertically. The centerline of these two screws are located 37mm (Roughly 1 7/16) back from the front edge of the cabinet, and the height spacing of them should be 32mm on center.

By the way, I got this info from Kitchen Cabinets Made Simple ;)

Hope this helps

Gregory

Thank you so much. After spending some quality time on the doors, I definitely did not want to screw anything up.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.