Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

My TWW lumber rack

Featured Replies

Marc's video on the lumber rack was just the kick in the rear I needed to finally solve one of my storage problems. So I spent the weekend constructing one for myself. The plywood cart is pretty much the same with the exception of an extra caster on the hinge side. And the vertical storage is not as extensive as marc's, but it is what fits my space.

LumberRack.jpg

LumberRack2.jpg

That's great. Good work! The only thing I might have done differently would have been to pivot the cutoffs cart on the left side so you can access it from inside the garage. Or will you always be working in your garage with the door open?

Tim

That rack will hold a ton of wood - looks great! I used a similar design when I built mine. The brackets have flat bottoms so I screwed a piece of 1/2" ply to the bottom of the brackets and that is where I keep all of my "Really Short" cut-offs. I don't know if that idea will work with your brackets, but I truly value that extra little space. Sorry for the bad phone pic, I couldn't find the cord for the camera.

post-4947-0-22461400-1309234015_thumb.jp

  • Author

That's great. Good work! The only thing I might have done differently would have been to pivot the cutoffs cart on the left side so you can access it from inside the garage. Or will you always be working in your garage with the door open?

Tim

I wanted the hinges on that side so I could unload sheets straight from the truck into the cart. Also the cart is able to swing out perpendicular to the wall, so getting sheet goods out with the door closed isn't that big of a deal.

Thanks everyone for the compliments, I can't believe how much real estate I freed up around the my two car garage by doing this project. Something I should of done sooner.

  • 2 weeks later...

Very nice rack for storage. Building my shop now and hope to be done before fall of 2020. I have been thinking of ways to build a rack behind my doors. I an going to put a 2'1/2'' wide double door that opens to the inside and thatwill be a great fit, I like the swing out plywood rack. I can't lift much anymore.

OLDMAN

DAVID

Very nice rack for storage. Building my shop now and hope to be done before fall of 2020. I have been thinking of ways to build a rack behind my doors. I an going to put a 2'1/2'' wide double door that opens to the inside and thatwill be a great fit, I like the swing out plywood rack. I can't lift much anymore.

OLDMAN

DAVID

2012-pretty optimistic aren't we! I built my shop about 13 yrs ago and I don't plan on being done till I am called home! Hope you post pics of your shop adventure.

dhall9-looks great. I am sure this will keep you happy for many yrs to come.

Nate

  • 1 month later...

Hi Marc,

I just viewed your lumber rack video ... very nice. Mine is very similar, except for the swing out sheet goods section, the way my 30'x50' shop is situated, my sheet goods can be slid into the rack with no real need to pivot out.

My question is .. in a previous video, I notice you had your sheets standing vertically with a clamp or something to told them tight against the wall. Do your sheet good take on the "potato chip" effect after being there for some time without being held tightly against the back wall?

I use Irwin Quick-Grip clamps while trying to come up with an idea for a vise-like screw system to hold them tight

Thanks

Mark

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.